Home Network Community > All Threads > My router keeps restarting on it's own.
< All Threads

My router keeps restarting on it's own.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

My router keeps restarting on it's own.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My router keeps restarting on it's own.
My router keeps restarting on it's own.
2023-09-10 15:57:02 - last edited 2023-10-09 07:45:59
Tags: #Troubleshooting
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.1 Build 230609 Rel.31746n(5553)

 

 

I've tried to contact the technical support in every possible way (Live Chat Support, Phone Call Support, Email Support, and etc). but no one is answering calls or replying to the emails I sent. 

 

After being put on hold for hours and listening to COVID-19 precaution message on loop with no one to answer the call I come here to seek help. 

 

I have an Archer C80 Router with hardware version 2.20 that I purchased 3 months ago and recently it started rebooting on it's own and it reached to a point where I could not plug in the WAN cable because the router kept restarting endlessly. When I removed the WAN cable it was on and didn't restart. 

 

TP-Link gave me a refurbished router as a replacement for it. However, last week I bought a brand new C80 and It's been restarting once or twice a day by itself and I'm worried that this unit might have a problem too. 

 

- I'm using the original adapter

- The router is in well ventilated place so it is not overheating. 

- The router is connected to a surge protector. 

- The auto reboot option is off. 

- I have already factory reset the router twice. 

- I'm using the latest firmware.

- I connect 3-4 devices wirelessly and I have a secondary router connected to my main router (The main router is restarting on it's own).

 

Here's the router log. 

 

Exception:|2023-09-08 22:13:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  0:09:36|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:00:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:07:49|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09 21:18:22|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 17:50:48|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 20:39:44|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 20:53:55|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 868
.->[404e2d78]->[404f0c3c]->[4039d5f0]->[4053d714]->[40218da0]->[40218ac0]->[404e53b8]->[40489e00]->[4054320c]->[4053f704]->[4054b09c]->[4054aea4]

 

Can anyone help me out? 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:My router keeps restarting on it's own. -Solution
2023-10-09 06:07:57 - last edited 2023-10-09 07:45:59

I've been provided with a beta version of the new firmware. Archer C80 triggered a reboot after receiving a specific packet. I've been using the beta firmware for about 9 days now and no restarts so far. The only thing that's been bothering me is the watermarks in the UI. 

 

I've been told that if everything goes as planned then this issue will be resolved in the next official firmware update. The engineer doesn't know the official release date. I will post a link to the new firmware when it gets updated over here 

 

https://www.tp-link.com/in/support/download/archer-c80/v2.20/#Firmware

 

Thank you! @Sunshine 

Recommended Solution
  0  
  0  
#7
Options
Re:My router keeps restarting on it's own. -Solution
2023-11-22 02:28:40 - last edited 2023-11-22 02:28:43

Hi All,

 

If any other users are experiencing similar issues, we recommend trying the solution provided in this thread: Archer C80v1&v2.2/C64v1/C6v4 Restarting Randomly

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#23
Options
22 Reply
Re:My router keeps restarting on it's own.
2023-09-11 11:40:27

  @SaurabhS 

 

Hi, thank you very much for posting on TP-Link Community.

1. May I know who your ISP is?

2. The refurbished router replaced for you is also C80 V2.2 and has no auto reboot issue now on the same line, right?

3. The brand new C80 is also V2.2? does it happen randomly or also when you connect WAN cable? when it happens, it just reboots once and then stay on, or keeps rebooting until you remove the WAN cable?

4. Is the secondary router another C80? 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:My router keeps restarting on it's own.
2023-09-11 12:52:17 - last edited 2023-09-11 13:14:20

  @Sunshine Thanks for the resposne. 

 

1. My ISP: Navkar Supertech Pvt Ltd

 

2. Yes, the replaced refurbished router is a C80 V 2.20 and the refurbished one has no issues but the one I had before that had rebooting issues too. That's why I got it replaced. It used to reboot 2-4 times a day and a few days later it went on a rebooting loop and it would only stop rebooting when the WAN cable was plugged out. It had the same hardware and firmware version that I have right now. 

 

3.The brand new router is an Archer C80 Hardware Version: v2.20 and Firmware Version:1.13.1 Build 230609 Rel.31746n(5553)

 

And, The router randomly reboots throughout the day and stays on. I got this router on 6th September 2023. It worked fine for two days then it started rebooting on it's own.

I have pasted the logs and the timestamps are from every reboot. 

 

4. I'm using the refurbished C80 as my secondary router and the new C80 is my main router which is having rebooting issues. My main internet line is going to a XPON/ONU device (Ubiqcom UB5010G) and I have to connect a Cat 6 patch cable to that device and the other end connects to my main router's WAN Port (The router that is having issues). And from my main router's LAN port I connect the secondary router.

 

And before all of this. I was using TL-WR840N. I used it for 3 years without any issues. I switched to C80 because I wanted to use gigabit speeds. I also used it for a couple of days while my C80 was going through the replacement procedure and it had no issues.

 

Exception:|2023-09-08 22:01:52|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-08 22:13:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  0:09:36|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:00:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:07:49|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09 21:18:22|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 17:50:48|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 20:39:44|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]

Exception:|2023-09-08 22:13:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  0:09:36|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:00:35|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09  3:07:49|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-09 21:18:22|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 17:50:48|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 20:39:44|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863
.->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]
Exception:|2023-09-10 20:53:55|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 868
.->[404e2d78]->[404f0c3c]->[4039d5f0]->[4053d714]->[40218da0]->[40218ac0]->[404e53b8]->[40489e00]->[4054320c]->[4053f704]->[4054b09c]->[4054aea4]

Exception:|2023-09-11 2:37:52| Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 868 .->[404e2d78]->[404f0c3c]->[4039d5f0]->[4053d714]->[40218da0]->[40218ac0]->[404e53b8]->[40489e00]->[4054320c]->[4053f704]->[4054b09c]->[4054aea4]

 

I've edited out my Internet IP and Public IP from these logs

 

##########################################################################
#                    Archer C80  System Log 
# Time = 2023-09-11 18:14:27 56183s
# H-Ver = Archer C80 2.20 : S-Ver = 1.13.1 Build 230609 Rel.31746n(5553)
# L = I've removed this address : M = 255.255.255.0
# WAN = PPPoE : W = Internet IP : M = 255.255.255.255 : G = My Public IP
# Cnt = 10624, Free = 10534, Busy = 90
##########################################################################
  0days, 00:00:07, [tmpd]register tmp app, type: 1
  0days, 00:00:07, [portal]portal init

  0days, 00:00:07, [lan]LAN: Set interface br-lan0 ip=my default gateway netmask 255.255.255.0.
  0days, 00:00:07, [tmpd]register tmp app, type: 2
  0days, 00:00:08, [tmpd]register tmp app, type: 4
  0days, 00:00:29, [DSLite]Dslite disable
  0days, 00:00:29, [portal]portal not enabled

  0days, 00:00:29, [portal]portal stop

  0days, 00:00:29, [httpd]Http server start!
  0days, 00:00:31, [wan]Wan ethernet port plug on.
  0days, 00:00:31, [dhcps]Send OFFER with ip 192.168.0.105.
  0days, 00:00:32, [pppoe]try special dial type 0
  0days, 00:00:32, [pppoe]TX PADI
  0days, 00:00:32, [dhcps]Send ACK to 192.168.0.105.
  0days, 00:00:37, [pppoe]TX PADI
  0days, 00:00:37, [pppoe]RX PADO, AC-NAME=removed on purpose
  0days, 00:00:37, [pppoe]TX PADR
  0days, 00:00:37, [pppoe]RX PADS[session=0706]
  0days, 00:00:38, [ppp][LCP]TX CONFIGURE_REQUEST
  0days, 00:00:38, [ppp][LCP]RX CONFIGURE_REQUEST
  0days, 00:00:38, [ppp][LCP]TX CONFIGURE_ACK[mru=1492, auth=C023/5, magic=FE248025]
  0days, 00:00:38, [ppp][LCP]RX CONFIGURE_ACK[mru=1480, magic=000075A5]
  0days, 00:00:38, [ppp][PAP]TX AUTHENTICATION_REQUEST
  0days, 00:00:38, [ppp][PAP]RX AUTHENTICATION_ACK
  0days, 00:00:38, [ppp][IPCP]RX CONFIGURE_REQUEST
  0days, 00:00:38, [ppp][IPCP]TX CONFIGURE_REQUEST
  0days, 00:00:38, [ppp][IPCP]TX CONFIGURE_ACK[ip=my public IP]
  0days, 00:00:38, [ppp][IPV6CP] RX something, but we will not negotiate it.
  0days, 00:00:38, [ppp][LCP]TX PROTOCOL_REJECT
  0days, 00:00:38, [ppp][IPCP]RX CONFIGURE_NAK
  0days, 00:00:38, [ppp][IPCP]TX CONFIGURE_REQUEST
  0days, 00:00:38, [ppp][IPCP]RX CONFIGURE_ACK[ip=Internet IP addres removed on purpose, manu-dns=8.8.8.8/8.8.4.4]
  0days, 00:00:39, [pppoe]ppp0 set localIp removed remoteIp my public IP mtu 1480
  0days, 00:00:39, [wan]advanced ddns -wanChanged
  0days, 00:00:39, [wan]systool sntpc -sntpRequest
  0days, 00:00:39, [dnsproxy]Register Dns Detect
  0days, 00:00:39, [dnsproxy]Register primary = 0x8080808, secondary = 0x4040808
  0days, 00:00:39, [inetd]INETD: select error, abort.
  0days, 00:00:39, [cwmp]cwmp is not start
  0days, 00:19:59, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 00:19:59, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:12:07, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:12:08, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:25:16, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:25:17, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:29:58, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:29:59, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:35:40, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:35:41, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:36:11, [dhcps]Send OFFER with ip 192.168.0.103.
  0days, 04:36:12, [dhcps]Send ACK to 192.168.0.103.
  0days, 04:37:47, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:38:12, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:38:13, [dhcps]Send ACK to 192.168.0.101.
  0days, 04:49:02, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 04:49:03, [dhcps]Send ACK to 192.168.0.101.
  0days, 05:24:50, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 05:24:50, [dhcps]Send ACK to 192.168.0.101.
  0days, 10:56:48, [dhcps]Send OFFER with ip 192.168.0.103.
  0days, 10:56:49, [dhcps]Send ACK to 192.168.0.103.
  0days, 12:49:00, [dhcps]Send OFFER with ip 192.168.0.100.
  0days, 12:49:01, [dhcps]Send ACK to 192.168.0.100.
  0days, 13:10:29, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 13:10:29, [dhcps]Send ACK to 192.168.0.101.
  0days, 14:05:13, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 14:05:13, [dhcps]Send ACK to 192.168.0.101.
  0days, 15:10:35, [dhcps]Send OFFER with ip 192.168.0.101.
  0days, 15:10:36, [dhcps]Send ACK to 192.168.0.101.

Exception:|2023-09-11  2:37:52|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 868
.->[404e2d78]->[404f0c3c]->[4039d5f0]->[4053d714]->[40218da0]->[40218ac0]->[404e53b8]->[40489e00]->[4054320c]->[4053f704]->[4054b09c]->[4054aea4]

  0  
  0  
#3
Options
Re:My router keeps restarting on it's own.
2023-09-26 06:37:53

  @SaurabhS 

 

Hello, to assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:My router keeps restarting on it's own.
2023-09-26 09:59:10 - last edited 2023-09-26 10:01:41

  @Sunshine 

 

Thank you for forwarding this issue to the engineers. 

 

I just wanted to post an update on the situation over here to summarize what's happened until now. So, TP-Link India has replaced both of my Archer C80 routers. My main router was replaced with a new C80, and my secondary router was replaced with a refurbished C80. All 4 C80 routers that I have used have the same hardware version 2.20 and they came with firmware version Archer C80(US)_V2.2_1.12.10 Build 230208. I've tried upgrading the firmware of all routers to the latest firmware but the issues still persists. 

 

Yesterday, I received a new replacement router that came with (H/W: 2.20 Firmware: 1.12.10 Build 230208). After I plugged in the new router it restarted 6 times in the span of 24 hours with the same error.

 

EXCEPTION Exception| Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 863 .->[404bfc08]->[404cdaec]->[4039c4d0]->[4051a154]->[40218ebc]->[40218bdc]->[404c2248]->[4046e6bc]->[4051fc4c]->[4051c144]->[40527adc]->[405278e4]

 

I'm using pppoe connection and I haven't changed any settings of any of the routers. They are at default.

 

I've tried every solution that I have found on live support and from email support. 

 

- I'm using the original adapter

- The router is in well ventilated place so it is not overheating. 

- The router is connected to a surge protector and a 24/7 power supply. 

- The auto reboot option is off. 

- I have tried factory resetting the routers.

- I'm using the latest firmware.

 

 

  0  
  0  
#5
Options
Re:My router keeps restarting on it's own.
2023-09-27 09:34:59

  @SaurabhS 

 

Thank you very much for the summary, I have provided all the information to support engineer, hope they could locate the issue soon.

Please let the community know if the issue can be located or resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:My router keeps restarting on it's own. -Solution
2023-10-09 06:07:57 - last edited 2023-10-09 07:45:59

I've been provided with a beta version of the new firmware. Archer C80 triggered a reboot after receiving a specific packet. I've been using the beta firmware for about 9 days now and no restarts so far. The only thing that's been bothering me is the watermarks in the UI. 

 

I've been told that if everything goes as planned then this issue will be resolved in the next official firmware update. The engineer doesn't know the official release date. I will post a link to the new firmware when it gets updated over here 

 

https://www.tp-link.com/in/support/download/archer-c80/v2.20/#Firmware

 

Thank you! @Sunshine 

Recommended Solution
  0  
  0  
#7
Options
Re:My router keeps restarting on it's own.
2023-10-09 07:47:06

  @SaurabhS 

 

Hi, thank you very much for the update, really happy to hear that the issue has been resolved by a beta firmware.

We community will also monitor when the new official firmware will be released.

 

Hope you could enjoy the internet with our product.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:My router keeps restarting on it's own.
2023-10-30 15:38:17

  @Sunshine Can this firmware be used on the Archer C64 too?

 

I have exactly the same problem, exactly as he describes and running around in circles with your tech support telling me to change power adaptor.

  0  
  0  
#9
Options
Re:My router keeps restarting on it's own.
2023-10-30 16:17:48

@ChrisUK  As far as I know the beta firmware I got was specifically written for C80. I wouldn't recommend installing different firmwares on different models before talking to the engineer as it could brick your router and void the warranty. I tried to roll back to the old versions of the firmwares but it didn't help in my case, but you can try it. 

 

They haven't updated the new firmware on the site yet. I hate how the beta firmware watermark covers the entire UI and I'm unable to read things because of it.

 

 

  0  
  0  
#10
Options
Re:My router keeps restarting on it's own.
2023-11-01 07:32:43

  @SaurabhS Thanks!

Run around in circles by tech support telling me I'm having storms or power cuts, or using a wrong adapter. I think I'd know about it if I had storms and power cuts / surges every single day with the same error code in log.

Kept offering up the entire log file - and response was "we don't need log to fix"

 

As it's not old, they are just saying return it to Amazon. But it's over 30 days old, so Amazon are difficult to deal with and I'll be without a router until get a new one. The service is shocking - is putting me off TP-Link products, they used to be reliable. Now stuck with this brick that reboots itself as can't be without it.

  0  
  0  
#11
Options
123

Information

Helpful: 0

Views: 2697

Replies: 22

Tags

Troubleshooting
Related Articles
Router keeps restarting
7542 0
my router keeps restarting
1133 0
Parental Controls and QoS keeps restarting on it's own while both are disabled
378 0
AX73 - keeps restarting randomly
822 0
Satellite Deco Keeps on Restarting
307 1
Deco BE85 keeps restarting on its own!
1715 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.