Home Network Community > All Threads > DECO X50-POE and X50-4G
< All Threads

DECO X50-POE and X50-4G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DECO X50-POE and X50-4G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DECO X50-POE and X50-4G
DECO X50-POE and X50-4G
2023-11-02 10:46:49 - last edited 2023-11-02 10:48:36
Model: Deco X50-4G   Deco X50 - PoE  
Hardware Version:
Firmware Version:

Hi,

 

I have no "technical" skills on this matter...

 

I'm moving to a bigger house, which has ethernet connection on all divisions, incluing on Laundry/Garage (different building).

 

I'm upgranding from a Archer MR6000 (good for my current appartment) to an X50-4G and 2 X50-POE.

 

 

My main concern is that the wifi signal probably wont reach garage. But with this solution, X50-4G, connected to ethertnet will take my internet signal to the X50-POE on the laundry, right? 

 

The contractor left the ethernet connection, on the Garage at floor level, but the X50-POE has can be mounted on the wall, shoul I leave it on the "floor" or put it higher?

 

Do you usually use the Guest feature for a separated wifi?

 

Tnks

Daniel

  0      
 
  0      
 
#1
Options
6 Reply
Re:DECO X50-POE and X50-4G
2023-11-03 10:46:01

  @danielhvf 

Hi, welcome to the community.

Yes, Deco X50-POE should get a connection through the Ethernet cables from the main Deco X50-4G to the laundry room.

As for the location, it will be better to put it higher (1.5-2m above the floor would be better). 

General questions about PoE feature on Deco X50-PoE

 

As for the guest network, it could be used as a separate WiFi if you need a single 2.4 or 5GHz WiFi band.

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:DECO X50-POE and X50-4G
2023-12-23 09:18:00

  @David-TP tnks David 

 

Does x50 4g supports VPN? 

  0  
  0  
#3
Options
Re:DECO X50-POE and X50-4G
2023-12-25 02:07:03

  @danielhvf Hi, the current firmware for Deco X50-4G does not support VPN Server/Client yet.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:DECO X50-POE and X50-4G
2023-12-27 09:48:56
the "yet" means that it will be release soon a firmware with that habillity? x50-4g firmware is so basic that makes me want my MR600 back 😱
  0  
  0  
#5
Options
Re:DECO X50-POE and X50-4G
2024-01-15 04:40:26

  @danielhvf Same here. Been waiting for almost a year now. Regret switching from my MR600 to Deco X50-4G. The firmware and features you get are not like what you get from X50. Unfair features and fimware rollout, where only a few models get prioritised while the rest will be left rotting.

  1  
  1  
#6
Options
Re:DECO X50-POE and X50-4G
2024-02-16 14:16:54

  @arktiknova Same here...Switched from MR600 to X50-4G and BIG REGRET in both cases. 

I wanted to expand the network with Mesh and the MR600 does also not have the setting options for my VPN provider. So I thought it would be possible with the X50-4G, based on my internet research. But: no luck. I bought several Deco extensions, including five cameras and smart home products, and now I realize that I can't make any VPN settings for this one either. Setting it up via the smartphone app is also annoying.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 719

Replies: 6

Related Articles
Deco X50-PoE & X50 Outdoor
340 0
Deco X50 PoE
435 0
Deco x50-poe and x1500-4g setup
301 1
All Deco X50-POE Off-Line
275 1
Deco X50-POE on cascade
72 0
Problem of Deco x50 Poe
31 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.