Home Network Community > All Threads > No 4G connection after reboot.
< All Threads

No 4G connection after reboot.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No 4G connection after reboot.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No 4G connection after reboot.
No 4G connection after reboot.
2024-02-19 15:42:03 - last edited 2024-02-22 02:09:30
Tags: #Firmware Update #Network Connectivity
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n

After getting a 4G+ signal using https://community.tp-link.com/en/home/forum/topic/654360?replyId=1321346

 

On Sunday I was only getting <10mb/s speeds  Rebooted the Mr600 but the router reports no internet.  The status said the SIM was prepaired so I assume it was reading it.  Tried doing a factory reset via the reset hole in the back.  Put the same SIM in a ZTE router which connected with 5/5 signal and download speeds of 60Mb/s.  Putting the SIM back in the MR600 again reporting No Internet.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:No 4G connection after reboot.-Solution
2024-02-21 10:30:03 - last edited 2024-02-22 02:09:30

  @Sunshine I don't think I performed a pinhole reset correctly as it had all the old settings I made from the factory default.   Held the pinhole reset for 30 seconds, this time it worked.   the router is connecting.   It looks like it was my fault.   This time I only changed the APN from three.co.uk to 3internet (which my other router was using) left network search to automatic, although not getting 4G+ I'm getting about the same speed with LTE.   I guess the transmitter is limited to 30Mbs download.

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:No 4G connection after reboot.
2024-02-21 02:07:54

  @amtrakuk 

 

Hi, after the factory reset, please check if network type and signal strength on the MR600 status page to see if it receives any 4G signal, if so, please try creating new profile manully on Advanced->Network->Internet page, if still no internet, please share with us screenshots of the status page and internet settings page.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:No 4G connection after reboot.-Solution
2024-02-21 10:30:03 - last edited 2024-02-22 02:09:30

  @Sunshine I don't think I performed a pinhole reset correctly as it had all the old settings I made from the factory default.   Held the pinhole reset for 30 seconds, this time it worked.   the router is connecting.   It looks like it was my fault.   This time I only changed the APN from three.co.uk to 3internet (which my other router was using) left network search to automatic, although not getting 4G+ I'm getting about the same speed with LTE.   I guess the transmitter is limited to 30Mbs download.

Recommended Solution
  0  
  0  
#3
Options
Re:No 4G connection after reboot.
2024-02-22 02:09:53

  @amtrakuk 

 

Thanks a lot for the update, glad to hear that you've resolved the problem.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 632

Replies: 3

Tags

Firmware Update Network Connectivity
Related Articles
No connection in 4g after reboot
16023 4
MR600 4G+ is not working
2559 7
MR600 v3 4g/4g+ issue
1318 0
Auto reboot after loss of connection?
1574 1
Connection drops off in 4G network every 30 minutes while high traffic occurs
178 0
Unable to Access certain websites in 4g Connection
319 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.