Home Network Community > All Threads > Deco Behaviour - Green Okay but no Internet
< All Threads

Deco Behaviour - Green Okay but no Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco Behaviour - Green Okay but no Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco Behaviour - Green Okay but no Internet
Deco Behaviour - Green Okay but no Internet
2024-02-20 14:22:28
Model: Deco X60  
Hardware Version:
Firmware Version: 1.5.2

Hi,

 

My deco network has been fine for some time.  I have an X60 connected to router and to a switch which is wired to other decos.  Suddenly lost internet and reset router but now decos are green, app says all is good yet wifi states no internet?!  I have taken ethernet cable from both the router and primary deco and all is good.  A bit stumped.

  0      
 
  0      
 
#1
Options
2 Reply
Re:Deco Behaviour - Green Okay but no Internet
2024-02-21 03:30:23

  @Gerard50 

Hi, did all the mobile devices report " no internet conenction" on the Wi-Fi?

It would be greate if you could connect a laptop via cable to the ISP modem directly to confirm the internet is working well.

You could also record the IP addresses on the laptop when it is connected to the modem, then compare it with the IPV4 address on the Deco APP>More>internet connection>IPV4 address here to see whether they are the same.

 

After that, please refer to this link to change the WAN DNS to 8.8.8.8/8.8.4.4 to see whether it helped:

How to change DNS server settings on my Deco

 

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco Behaviour - Green Okay but no Internet
2024-02-21 04:08:17
Thanks for the reply. No devices would connect to the wifi. Ethernet cable from both router and primary deco worked fine. Very strange and ended up resetting deco network, which worked but was a pain. Will consider your other recommendations next time thanks.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 196

Replies: 2

Related Articles
New Deco X60 shows strange behaviour after firmware update
1916 0
The deco is already Color Green But there is No internet
312 0
Deco x60 Showing Disconnected but with Solid Green Light
4246 0
Deco X60 blinkg red to green solid in loop...
1060 0
Deco App Behaviour
354 2
Deco X60 shows disconnected in app, yet unit has a solid green light
18888 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.