Home Network Community > All Threads > Replace main X60 Deco with V3 hardware instead of V2 hardware
< All Threads

Replace main X60 Deco with V3 hardware instead of V2 hardware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Replace main X60 Deco with V3 hardware instead of V2 hardware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Replace main X60 Deco with V3 hardware instead of V2 hardware
Replace main X60 Deco with V3 hardware instead of V2 hardware
2024-04-19 19:05:11 - last edited 2024-06-22 11:43:08
Model: Deco X60  
Hardware Version: V2
Firmware Version:

Hey there,

 

I currently have the following devices:

 

3 X60 with V2 hardware. One of those is my main

1 X50 Outdoor with V1 hardware

 

Let's say I add one more X60 as the new main deco but with the V3 hardware version.

 

I have two questions:

  1. Which features would I get? (targeting which firmware version?) e.g. will iot support be added to the app (it is not supported with X60 V2 hardware but it supported with the V3)?
  2. Since there is a an actual AX difference (V3 is AX 5400), how would that effect the mesh?

 

Thank you!

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Replace main X60 Deco with V3 hardware instead of V2 hardware-Solution
2024-04-24 08:03:30 - last edited 2024-04-25 10:49:58

  @Koykoyk 

Hi, 

For Deco X60_V3_1.2.5, it is on the 1.8.0 firmware platform here:

Understand the Differences Among Deco Firmware Platforms

So you will have the VPN server/client, IOT Network. 

And the new Mesh system will start using the HomeShield Security kit.

 

Deco X60_V3 is still AX3000 and V3.2 is AX5400. It would not affect the software features. Mobile devices that also support Wi-Fi 6 might have a higher wireless link speed from AX5400.

Thank you very much and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#2
Options
3 Reply
Re:Replace main X60 Deco with V3 hardware instead of V2 hardware-Solution
2024-04-24 08:03:30 - last edited 2024-04-25 10:49:58

  @Koykoyk 

Hi, 

For Deco X60_V3_1.2.5, it is on the 1.8.0 firmware platform here:

Understand the Differences Among Deco Firmware Platforms

So you will have the VPN server/client, IOT Network. 

And the new Mesh system will start using the HomeShield Security kit.

 

Deco X60_V3 is still AX3000 and V3.2 is AX5400. It would not affect the software features. Mobile devices that also support Wi-Fi 6 might have a higher wireless link speed from AX5400.

Thank you very much and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#2
Options
Re:Replace main X60 Deco with V3 hardware instead of V2 hardware
2024-04-24 11:32:30

  @David-TP Thank you! I understand, so the main deco is the one that decides which features I get, and the rest of them are following orders.

 

  1  
  1  
#3
Options
Re:Replace main X60 Deco with V3 hardware instead of V2 hardware
2024-04-25 01:44:22

  @Koykoyk 

Hi, yes.

For features that only require the NAT gateway/DHCP server, the main Deco will decide which features you could get.

However, some features need the cooperation of the whole Mesh system, such as the connection preference for satellite Deco units/mobile clients.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  2  
  2  
#4
Options

Information

Helpful: 1

Views: 743

Replies: 3

Related Articles
Deco X60 V3 not upgrading
782 0
Can main deco *REPLACE* the current main router ?
1016 0
Deco X60 (V3) Not updating firmware
327 1
X60 vs X55 as Main Deco
2511 0
Replace main Deco
435 0
X60 main deco crashes
390 4
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.