@Alexandre. 

 

Yes, I can discovery cable health with many other methods, but now a i have to unplug m9 device on both edges to check cable integrity.

 

But, this is a physical intervention on my network to do a simple cable check and taking into account that my devices are note easy reachable.

 

But your solution is not that simple , think if i have a topology like this:  main deco (eth0) ---> (eth1) deco satelite 1 (eth0) --> (eth1) deco satelite 2 (eth0) --> (eth1) deco satelite 3 (eth0) -- device X ...... so in this kind of topology i should have to has a switch between each satelite connection. its insane.

 

So, my suggestion is as simple as possible. Change the app to show device port link negotiated speed for LAN / WAN / Wifi. I don't think it requires much effort. would be best for customers.

 

Thanks 

  @mdonato 

Hi

 

Thank you for posting on the TP-Link community, and we certainly appreciate all your feedback and feature request(s) here.

While we don't have any specific details that I can share around if link speed feature can come to all the Decos, or when it might, I'll make sure to log this feature request and pass it along to the team.

I'm moving this conversation into the ‘APP Request (Deco)' area and tagging it as a ‘Future Consideration’ for better visibility.

Feel free to let us know of any other feature requests you may have, we’d be happy to send them up for you.

Warm regards.

  @Joseph-TP 

 

Thanks for reply, but this Thread cannot be found at Feature Request (Deco) space.

 

Do you have a link for this feature request ? Or, if it's not done yet, please let me know when it will be addressed. 

 

Thanks

Please, I just bought a BE85 and I need to check if both of them are connected @ 10gbps, I can't use iperf yet because I don't have PCs with more than 2.5gbe (yet) but it would be nice to know the ethernet backhaul between Decos is correct.

Just found a potential way to check the link speed in the system logs by disconnecting and reconnecting the ethernet cable. Very cumbersome since the app or web page should just tell us...

 

Here's an example with two BE85 connected @ 10gbps: