IP Phone integration
Until recently, I used a Fritzbox 7590AX with IP based house phones (3). Worked without a hitch. I have changed now to the Deco BE85 system. Works super with my fiber optics connection. However, at the moment I can't use my phones. Does anyone know if I can somehow integrate the Fritzbox with my new system to continue using my phones?
cdpohl
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for your response.
After fiddling a while with the cables, I found the solution and phones are working now fine. I have connected a cable from the Deco's LAN port to the WAN port on the Fritzbox 7590AX, and had instant success.
Thanks again for your help.
- Copy Link
- Report Inappropriate Content
Assuming at the moment you have removed your Fritzbox and your main Deco is in router mode?
You could put the Fritzbox back in and disable the wifi on it, then connect main Deco to Fritzbox with ethernet cable, main Deco would then need to be put in Access point mode. On Deco app go to More>advanced>operation mode and choose "access point". You can then connect your IP phone to your Fritzbox.
Cheers
- Copy Link
- Report Inappropriate Content
Thanks for your response.
After fiddling a while with the cables, I found the solution and phones are working now fine. I have connected a cable from the Deco's LAN port to the WAN port on the Fritzbox 7590AX, and had instant success.
Thanks again for your help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 253
Replies: 2
Voters 0
No one has voted for it yet.