Archer VX1800v VDSL does not reconnect automatically

Archer VX1800v VDSL does not reconnect automatically

Archer VX1800v VDSL does not reconnect automatically
Archer VX1800v VDSL does not reconnect automatically
2024-08-03 16:36:51
Model: Archer VX1800v  
Hardware Version: V1
Firmware Version: 0.12.0 2.0.0 v6092.0 Build 240329 Rel.14160n

I often lose connection during storms. The modem tries to reconnect, but fails and needs a manual reboot.

 

The modem displays two messages and the Internet LED is red.

 

  1. Check the DSL settings such as VLAN ID. Contact your Internet service provider to confirm if your line is in good condition.
  2. PPP connection failed. Please contact your Internet service provider to confirm if your line is in good condition. If the problem still exists, please contact TP-Link technical support for further help.

 

Everything works fine after a manual reboot.

 

 

setup

  0      
  0      
#1
Options
5 Reply
Re:Archer VX1800v VDSL does not reconnect automatically
2024-08-04 20:23:38

Make sure your firmware is up-to-date. Updating solved  IDM Crack Patch similar issues for me with the same model.

  0  
  0  
#2
Options
Re:Archer VX1800v VDSL does not reconnect automatically
2024-08-06 07:58:53

  @Pavel_R 

 

Hi, thanks for posting question here.

As per your description, it is more suggested to contact your ISP to check the VDSL line.

 

 

 

 

 

  0  
  0  
#3
Options
Re:Archer VX1800v VDSL does not reconnect automatically
2024-08-06 08:39:59

  @Marvin_S 

 

I don't think it's an ISP issue.

My old Tenda V12 Wireless AC1200 modem doesn't have this problem.

  0  
  0  
#4
Options
Re:Archer VX1800v VDSL does not reconnect automatically
2024-08-17 17:05:07

  @Pavel_R hello, did you find any solution for this problem?

  0  
  0  
#5
Options
Re:Archer VX1800v VDSL does not reconnect automatically
2024-08-19 16:38:53

  @Morris1990

Not yet. Fortunately, it does not happen often.

  1  
  1  
#6
Options

Information

Helpful: 0

Views: 327

Replies: 5

Related Articles