Deco X90 separate 2.4G & 5G WiFi

Deco X90 separate 2.4G & 5G WiFi

Deco X90 separate 2.4G & 5G WiFi
Deco X90 separate 2.4G & 5G WiFi
2024-08-13 10:57:48 - last edited 2024-08-19 08:57:27
Model: Deco X90  
Hardware Version: V1
Firmware Version: 1.26 b20231225 r33179

Hi,

 

I wish to know how to separate 2.4G & 5G WiFi on Deco X90.  Now both are joint under the same SSID.  Previous models like M5 i remember can set separate SSID for 2.4G & 5G.

 

The reason i need this is because of my Samsung A9+ tablet which is capable of 5Ghz wifi doesn't work correctly with X90, it keeps disconnecting very soon after connected, and prompt for password.  I discovered the root cause after many trials and finally found that it works with 2.4G on X90 only.  I do not know the problem is from X90 or the tablet.  All others devices work with X90 5Ghz except for A9+ tablet; A9+ 5Ghz works with all other routers i have except for X90.

 

For the tablet to work with 2.4GHz only on my X90, i need to enable only 2.4G otherwise the tablet will auto connect to the non working 5Ghz channel.  When i do this, all other devices i have will lose the connection to 5Ghz.

 

Can X90 setup separate SSID for 2.4Ghz and 5Ghz? Joint SSID is good but in my case it is not working.

 

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco X90 separate 2.4G & 5G WiFi-Solution
2024-08-13 13:21:54 - last edited 2024-08-19 08:57:27

  @iiee 

 

Firmware version 1.2 should have Connection Preference feature, which you can use to force Samsung A9+ tablet to run on 2.4GHz band. See Part 2 of the following document: How to select a preferred signal source on the Deco App

 

Another option would be to enable IoT Network, and connect tablet to it. By default, IoT Network broadcasts 2.4GHz only. See https://community.tp-link.com/us/home/stories/detail/501922

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Deco X90 separate 2.4G & 5G WiFi-Solution
2024-08-13 13:21:54 - last edited 2024-08-19 08:57:27

  @iiee 

 

Firmware version 1.2 should have Connection Preference feature, which you can use to force Samsung A9+ tablet to run on 2.4GHz band. See Part 2 of the following document: How to select a preferred signal source on the Deco App

 

Another option would be to enable IoT Network, and connect tablet to it. By default, IoT Network broadcasts 2.4GHz only. See https://community.tp-link.com/us/home/stories/detail/501922

Recommended Solution
  0  
  0  
#2
Options
Re:Deco X90 separate 2.4G & 5G WiFi
2024-08-13 13:29:27

  @Alexandre. 

 

Thanks, this solved my problem.

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 246

Replies: 2

Related Articles