Home Network Community > All Threads > GX90 don't maintain connected
< All Threads

GX90 don't maintain connected

GX90 don't maintain connected

GX90 don't maintain connected
GX90 don't maintain connected
2024-09-07 14:22:35 - last edited 2024-09-12 10:13:51
Tags: #Installation
Model: Archer GX90  
Hardware Version: V1
Firmware Version: 1.1.5 Build 20240428 rel.48921(5553)

Hello I live in Brazil and I'm having issues with myGX90

I was using Vivo internet two days ago normal but after moving to a new house and started using Claro Internet my route doesn't work.

I connected the correct port from the modem to the router and the router started pulsing orange after a while it changed to red after a while it changed to white and then returned to pulsing orange. 
Because of that I even can connect using the port URL 192.168.1.1 because it also stops working when the color changes.

 

I called the Claro, and the technical support said that the IPV4 port is already open and the problem is with the Router but I was using it two ago normally with another Provider. 
Can someone help me?

 

@Update I configured a Google Wi fi and everything goes fine. I don't know what is happening with my Archer gx90

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:GX90 don't maintain connected-Solution
2024-09-12 03:09:20 - last edited 2024-09-12 10:13:51

  @Marvin_S Hello Marvin, one technician discovered that was my power source problem. We changed it and it returned to work. Thank you

Recommended Solution
  0  
  0  
#3
Options
4 Reply
Re:GX90 don't maintain connected
2024-09-09 09:33:39

  @allanegidio 

 

Hi, thanks for posting question here.

According to your description, you just connected the router to your modem, the Internet LED can not keep stable at all, and you failed to log into the web UI and set it up, right?

If you use Google device to replace GX90 and your Google device works, did you use the same Ethernet cable and plug into the same Ethernet port on your modem?

There is one 1 Gbps WAN/LAN port  and one  2.5 Gbps WAN/LAN port on GX90, which port did you connect?

And did you take factory reset before the physical re-connection? That should be the first step if you change ISP or modem.

It is also suggested to contact local technical support for direct help.

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  1  
  1  
#2
Options
Re:GX90 don't maintain connected-Solution
2024-09-12 03:09:20 - last edited 2024-09-12 10:13:51

  @Marvin_S Hello Marvin, one technician discovered that was my power source problem. We changed it and it returned to work. Thank you

Recommended Solution
  0  
  0  
#3
Options
Re:GX90 don't maintain connected
2024-10-03 23:12:24

  @allanegidio estou com o mesmo problema amigo, pelo o que pude descobrir esse Roteador tá com dificuldade de autenticação de Internet, minha conexão é um ONU em bridge da operadora mais o TPlink GX90, Roteador caro dando transtorno.

  0  
  0  
#4
Options
Re:GX90 don't maintain connected
2024-10-03 23:18:53

  @allanegidio mas se o problema é na fonte o Wi-Fi fica caindo né? No meu caso a Internet fica caindo mas o Wi-Fi segue conectado ao celular, mas as luzes mudam de cor, e Internet é muito lenta no Wi-Fi e cabo Ethernet. 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 360

Replies: 4

Tags

Installation
Related Articles
Archer GX90 luces naranja y blancas parpadeando
225 0
Archer gx90
690 0
GX90 EasyMesh
208 0
How to configure to use two GX90
190 0
Archer GX90 AX6600 Traffic monitor?
632 0
Archer GX90 - MU-MIMO and Beamforming
633 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.