Home Network Community > All Threads > clients cannot connect to Deco P7 in XE75 MeshNetwork
< All Threads

clients cannot connect to Deco P7 in XE75 MeshNetwork

clients cannot connect to Deco P7 in XE75 MeshNetwork

clients cannot connect to Deco P7 in XE75 MeshNetwork
clients cannot connect to Deco P7 in XE75 MeshNetwork
2024-10-01 10:32:30 - last edited 2024-11-14 09:38:46
Model: Deco P7   Deco XE75  
Hardware Version: V1
Firmware Version: 1.4.11

Hi

I have a Mesh network with multiple XE75 all working fine.(using latest FW)

I then tried to connect Deco P7 via WI-Fi to this Network which also works (using latest FW)

I can see the Deco P7 in the overview map however, I am not able to connect any client sto the P7.

Also tried to switch off fast roaming - no success either.

 

When I have tried to setup the P7 as its own network connecting directly to the router then all is working fine.

 

Factory reset didnt help.

I tried the same with another P7 - same results above.

Somehow it seems that P7 cannot work with XE75 in teh same Wifi Network.

 

Any ideas?

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:clients cannot connect to Deco P7 in XE75 MeshNetwork-Solution
2024-10-07 07:13:29 - last edited 2024-11-14 09:38:46

  @RLDJ9 

Hi,

 

All Deco models can work together.

 

It’s possible that the device prioritized connecting to the Deco XE75 when connect to Deco network. You can connect a wired device directly to the P7 unit and test if it will show up in the P7's client list.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:clients cannot connect to Deco P7 in XE75 MeshNetwork-Solution
2024-10-07 07:13:29 - last edited 2024-11-14 09:38:46

  @RLDJ9 

Hi,

 

All Deco models can work together.

 

It’s possible that the device prioritized connecting to the Deco XE75 when connect to Deco network. You can connect a wired device directly to the P7 unit and test if it will show up in the P7's client list.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 132

Replies: 1

Related Articles
Cannot resolve names of Deco P7 clients
1018 0
Deco P7
898 0
I cannot connect to main Deco node. Not able to setup the Deco P7
1948 0
Deco XE75 Cannot Airplay
367 1
Extension for deco p7
1201 1
Deco M4 WPS - Cannot connect
1361 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.