Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:

Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:

Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:
Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:
2024-10-18 14:53:41 - last edited 2 weeks ago
Model: HC220-G5  
Hardware Version: V1
Firmware Version: 0.15.0 2.0.0

Problem with the "initializing" state on a TP-LINK Mesh HC220-g5: What does the device do during the initializing state?

(The manual indicates that this state is shown by a flashing yellow LED.)

Why do my devices take so long (20/30/60 minutes) to initialize?

 

Context: My devices have been reset to factory settings and are not associated with any network. When turned on, they take between 20 and 30 minutes to get past this state. However, when moved to another location, they get past the state in just 2 minutes. Any idea why?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:-Solution
2024-10-21 10:53:59 - last edited 2 weeks ago

  @franco_DP 

Hi, Would it be relevant to the power input? Have you tried to test with another power socket at home?

Wait for your reply and best regards.

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Problem with the "initializing" state on a TP-LINK Mesh HC220-g5:-Solution
2024-10-21 10:53:59 - last edited 2 weeks ago

  @franco_DP 

Hi, Would it be relevant to the power input? Have you tried to test with another power socket at home?

Wait for your reply and best regards.

Recommended Solution
  1  
  1  
#2
Options