How to boost signal between two decos

How to boost signal between two decos

How to boost signal between two decos
How to boost signal between two decos
2024-10-19 08:50:31 - last edited 2024-11-14 10:04:13
Model: Deco X50  
Hardware Version:
Firmware Version:

I currently have two decos at opposite ends of my home. 

 

The main one is out in the entry where the fibre comes in so cannot be moved. 

 

The second is in the living room, as far away as can be from the main unit.  The signal isn't great. 

 

Would adding an additional deco in between improve the signal to the main unit? 

 

WiFi client signal strength is great everywhere but I'm getting speed loss when connected to the second unit as its signal strength to the main is poor. 

 

 

Thanks in advance. 

 

Rob. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to boost signal between two decos-Solution
2024-10-21 16:54:42 - last edited 2024-11-14 10:04:13

  All sorted. 

I purchased an additional Deco and placed it between the two. 

 

Signal is now great between all decos. 

 

I just wondered how the decos would react by adding an additional unit.  I. E. Would they act independently in AP mode and therefore not increase the signal to the furthest away.

 

By adding the 3rd deco and telling them how to communicate upstream problem solved. 

 

Thanks for all of your help. 

 

Rob 

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:How to boost signal between two decos
2024-10-19 11:45:54

  @rhbmcse 

 

This is a good idea to place additional unit in the middle. I would recommend going with same model of Deco, which is X50. In case you need to wall or ceiling mount new Deco unit, consider X50-PoE.

  0  
  0  
#2
Options
Re:How to boost signal between two decos
2024-10-20 23:06:46

  @rhbmcse Assuming you are connecting to the two Decos wirelessly.  Does the second Deco have to be on the far side of the living room to get signal elsewhere in the house?  Have you tried moving it closer to the Deco in the entryway?  

  0  
  0  
#3
Options
Re:How to boost signal between two decos-Solution
2024-10-21 16:54:42 - last edited 2024-11-14 10:04:13

  All sorted. 

I purchased an additional Deco and placed it between the two. 

 

Signal is now great between all decos. 

 

I just wondered how the decos would react by adding an additional unit.  I. E. Would they act independently in AP mode and therefore not increase the signal to the furthest away.

 

By adding the 3rd deco and telling them how to communicate upstream problem solved. 

 

Thanks for all of your help. 

 

Rob 

Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 187

Replies: 3

Related Articles