Nest fails to connect after firmware upgrade

Nest fails to connect after firmware upgrade

Nest fails to connect after firmware upgrade
Nest fails to connect after firmware upgrade
2024-11-12 04:45:30 - last edited 3 weeks ago
Model: Deco XE75 Pro  
Hardware Version: V1
Firmware Version: 1.4.1

Hi,

 

Not sure if it is a known issue, after upgrading my Deco XE75 pro to current firmware 1.4.1, my 3rd-gen Nest learning Thermostat fails to associate wifi. Even I have enabled IOT wifi with WPA or WPA2, still no luck.

 

 

Any help is appreciated.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Nest fails to connect after firmware upgrade-Solution
2024-11-13 09:01:03 - last edited 3 weeks ago

  @linesight 

Hi,

 

Is there any error message when you fail to connect? You can also refer to its User Manual and check if it needs to change the settings on the router.

Make sure that you have input the ID and password correctly and no space. Reboot the Deco and try again.

And you can also create a 2.4G guest network and try to connect again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Nest fails to connect after firmware upgrade-Solution
2024-11-13 09:01:03 - last edited 3 weeks ago

  @linesight 

Hi,

 

Is there any error message when you fail to connect? You can also refer to its User Manual and check if it needs to change the settings on the router.

Make sure that you have input the ID and password correctly and no space. Reboot the Deco and try again.

And you can also create a 2.4G guest network and try to connect again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 89

Replies: 1

Related Articles