NX200: switch LAN3/WAN
I've got an NX200 5G router. I couldn't figure out how the LAN3/WAN port would work as an LAN port. The other two LAN ports work well.
I didn't change something at the preset settings on port forwarding / DHCP / DNS / ...
Is there a setting somewhere to change the WAN port to be the LAN3 port?
Tried already to restart it. When I connect the same device with the same cable to the LAN1 or LAN2 port it does work.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I solved it on my own with the help from an other customer anserwing my question at Amazon:
Go to settings / Advanced / Internet --> delete all entries in the table "internet settings". Then the LAN3 Port will be changed from WAN to LAN3.
Even TP-Link support didn't knew that - they gave me the option to get a new device...
- Copy Link
- Report Inappropriate Content
Additional information: It does recognize the cable. But the port is listed as WAN and not LAN3. So, there might be an option somewhere to switch that? Couldn’t find it yet…
- Copy Link
- Report Inappropriate Content
I solved it on my own with the help from an other customer anserwing my question at Amazon:
Go to settings / Advanced / Internet --> delete all entries in the table "internet settings". Then the LAN3 Port will be changed from WAN to LAN3.
Even TP-Link support didn't knew that - they gave me the option to get a new device...
- Copy Link
- Report Inappropriate Content
@123421 I have this same problem with my new NX200 router, as I def need all those 3 LAN ports for my hubs. I went to see firmwares available, and got confused as the latest published firmware was older version..so I thought to pick up biggest in version number - a mistake! It seems that EU version 1_4_... Is not recognising 3 LAN ports, whatever you do. But when I installed latest, but older firmware version 1_3_... router started to work smoothly and all LAN ports are now in use!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 121
Replies: 3
Voters 0
No one has voted for it yet.