Changed to EE and it now will not connect

Changed to EE and it now will not connect

Changed to EE and it now will not connect
Changed to EE and it now will not connect
a week ago - last edited a week ago
Model: RE300  
Hardware Version:
Firmware Version: S/N 2207053000422 UK/1.0

Changed to EE 

Won't connect

Tried WSP button on router.

Why won't it work?

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Changed to EE and it now will not connect -Solution
a week ago - last edited a week ago

  @PSG100 

 

Hi,

 

Please try again.

First "Reset" the RE300. (marked "1" in the picture taken from the user manual below)

Then wait a minute or two for the RE300 to boot up again.

Then perform the step marked "2".

 

Recommended Solution
  0  
  0  
#2
Options
Re:Changed to EE and it now will not connect -Solution
a week ago - last edited a week ago

 Hi @PSG100,

 

Via the WPS button, there is a physical WPS button on the Range Extender. Press the WPS button on the Router, and the Range Extender in turn. The Range Extender will connect to the Router automatically within 2 minutes. If the router doesn't have a WPS button, you may try the other two methods instead. For detailed instructions, please refer to:

Configure my Range Extender via WPS button

 

Alternatively, here is a full setup video for your reference:

How to set up a TP-Link Range Extender

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Changed to EE and it now will not connect -Solution
a week ago - last edited a week ago

  @PSG100 

 

Hi,

 

Please try again.

First "Reset" the RE300. (marked "1" in the picture taken from the user manual below)

Then wait a minute or two for the RE300 to boot up again.

Then perform the step marked "2".

 

Recommended Solution
  0  
  0  
#2
Options
Re:Changed to EE and it now will not connect -Solution
a week ago - last edited a week ago

 Hi @PSG100,

 

Via the WPS button, there is a physical WPS button on the Range Extender. Press the WPS button on the Router, and the Range Extender in turn. The Range Extender will connect to the Router automatically within 2 minutes. If the router doesn't have a WPS button, you may try the other two methods instead. For detailed instructions, please refer to:

Configure my Range Extender via WPS button

 

Alternatively, here is a full setup video for your reference:

How to set up a TP-Link Range Extender

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 64

Replies: 2

Related Articles