EE sim APN settings?
EE sim APN settings?
I've just been attempting to set up a new X50-5G using an EE sim that I've been using successfully in another router for years using the settings below:
- Name: ee internet (lower case)
- user name: eesecure
- password: secure
- IP Type: IPv4 (select from dropdown)
- APN: everywhere
- keep ‘set DNS server manually’ as unchecked so its auto.
Can anyone tell me what the settings are for the X50? I tried many combinations of the above but couldn't get the internet connection to work and couldn't download the ISP settings either as part of the set up process
UPDATE: returned the Deco router in the end and replaced it with a more recent TP-Link model which worked first time. Thanks for all the replies!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@mc13 Hi, Thank you very much for the feedback.
If you still have the EE SIM card, could you please help me save the following details:
1. Insert the EE SIM back into Archer NX200.
2. Restart Archer NX220 once then save a copy of the system log under the Advanced>System tools>System logs(and send it to support.forum@tp-link.com)
EE is one of the main mobile service providers in the UK. I’m confident that local field tests have been conducted, and both the Deco X50-5G and Archer NX200 are supposed to work well with EE SIM plans. For more troubleshooting suggestions, please refer to Set Archer/Deco 4G/5G Routes with EE SIM.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Hi,
how about the Authentication type? It is recommended to use" PAP" .
can I also have a picture of your current internet settings, such as:
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP authentication type is currently set to Pap but I've tried all the other options too. I'm running the latest firmware (1.1.3)
- Copy Link
- Report Inappropriate Content
@David-TP additional screen for the mobile settings
- Copy Link
- Report Inappropriate Content
@David-TP APN settings below.
- Copy Link
- Report Inappropriate Content
@David-TP device details below.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
The settings seem fine and it should work well.
Did you also test the default EE profile embedded in the ISP profile?
Have you tried to put the SIM card into the mobile phone in case the SIM card is locked to a certain IMEI 5G router?
By the way, What is the model number of your original 5G router?
If possible, it is also suggested to check with EE to see if they have any other suggestions or are able to reset the SIM card settings.
Best regards.
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, Thanks for the update.
The settings seem fine and it should work well.
Did you also test the default EE profile embedded in the ISP profile?
Have you tried to put the SIM card into the mobile phone in case the SIM card is locked to a certain IMEI 5G router?
By the way, What is the model number of your original 5G router?
If possible, it is also suggested to check with EE to see if they have any other suggestions or are able to reset the SIM card settings.
Best regards.
@David-TP the default APN settings are 'Three' and 'Custom'. I've tried the custom one, but by default it doesn't contain the settings I need for EE.
My sim works perfectly in my Huawei CPE pro 2 router using the recommended EE APN settings.
I'll try putting it into my phone and see if that works. There's an EE shop 2 mins from my apartment that I can seek advice from too although as it's not one of their branded routers they tend to only have generic suggestions.
- Copy Link
- Report Inappropriate Content
@David-TP Just tried the router sim in my phone and it works fine. Also checked the APN settings with the EE store and they reckon they're good too, they also confirmed the SIM was in the right way (see pic).
I'm assuming my hardware is V1.0, so the recent firmware update to v1.1.3 should be good too?
I tried another factory reset and set up earlier today but just having the same issues. Regardless of APN auth type, I just get the alternating 'check your APN' or 'SIM not inserted' errors.
Pretty much run out of patience with this now, so will probably be returning it tomorrow :(
- Copy Link
- Report Inappropriate Content
@Leeds_guy use BT APN settings and don't use 5g 4g only
- Copy Link
- Report Inappropriate Content
@Leeds_guy see below works fine
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 7426
Replies: 17