Home Network Community > All Threads > Unable to get ethernet backhaul working, tried AP & Router mode
< All Threads

Unable to get ethernet backhaul working, tried AP & Router mode

Unable to get ethernet backhaul working, tried AP & Router mode

Unable to get ethernet backhaul working, tried AP & Router mode
Unable to get ethernet backhaul working, tried AP & Router mode
Friday - last edited 22 hours ago
Tags: #Deco Ethernet Backhaul #Access Point Mode
Model: Deco X50 - PoE  
Hardware Version:
Firmware Version: 1.2.5

Hi there,

 

My Deco's have been working fine via WIFI, but I now want to have them hard wired as my 300mb connection only transfers through to 75mb ish at the end of my house.

 

I have tried a few different ways to wire it up, but I can't get the ethernet backhaul to work!

 

Currently wired as the below, in Access Point mode, but have also tried Router Mode.

 

1) Router --> Deco--> PoE Switch --> Deco #1 & Deco #2  (so a star network, I believe it is called)

 

However, it still connects via Wi-FI with below image...

 

Can anyone please advise?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Unable to get ethernet backhaul working, tried AP & Router mode-Solution
Friday - last edited 22 hours ago

  @Andeh1 

 

Connect one of Satellite Deco directly to Main Deco with Ethernet cable, see if it can get Ethernet backhaul. Router --> Main Deco--> Satellite Deco

 

If it does, it is possible switch that you are using does not support Deco Ethernet backhaul protocols. More on the topic of Deco Ethernet backhaul can be found here: General questions about Ethernet Backhaul feature on your Deco

Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Unable to get ethernet backhaul working, tried AP & Router mode-Solution
Friday - last edited 22 hours ago

  @Andeh1 

 

Connect one of Satellite Deco directly to Main Deco with Ethernet cable, see if it can get Ethernet backhaul. Router --> Main Deco--> Satellite Deco

 

If it does, it is possible switch that you are using does not support Deco Ethernet backhaul protocols. More on the topic of Deco Ethernet backhaul can be found here: General questions about Ethernet Backhaul feature on your Deco

Recommended Solution
  0  
  0  
#2
Options
Re:Unable to get ethernet backhaul working, tried AP & Router mode
Friday
Thank you for the reply... I tried that & it still only goes via the WIFI. I know the ethernet is fine because I can get a hard line connection when plugging it into my laptop! Both my 48 way switch (TL-SG1048) and POE switch (LS108GP) are TP Link ones!
  0  
  0  
#3
Options
Re:Unable to get ethernet backhaul working, tried AP & Router mode
Friday

I take it back, when I took an ethernet directly from the switch to the Deco is worked.... so I must have an issue either with the inbult cables (ill check now) or somewhere else?

 

Thanks...ill post back here when/if I find anything!

  0  
  0  
#4
Options
Re:Unable to get ethernet backhaul working, tried AP & Router mode
Friday - last edited Friday

welp, im an idiot! I have two ports per network location, one live & one not (spare). I had them all plugged into the 'offline' port..... now that im using the 'live' ports...all is working well & im getting rull speed wifi everywhere.

 

Thank you again :)

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 58

Replies: 4

Tags

Deco Ethernet Backhaul Access Point Mode
Related Articles
Losing ethernet backhaul
4291 3
X50 PoE Ethernet backhaul does not work
185 1
Ethernet not working as backhaul
231 0
POE and Ethernet Backhaul
448 0
Deco ain’t working properly not staying Ethernet backhaul
267 0
How do I tell if Ethernet Backhaul is working
2263 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.