MR3020 + E3272 + NVR issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR3020 + E3272 + NVR issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR3020 + E3272 + NVR issue
MR3020 + E3272 + NVR issue
2015-04-13 17:27:17
Region : Others

Model : TL-MR3220

Hardware Version : Not Clear

Firmware Version :

ISP :


Hi all,

My configuration:
MR3020 latest fw
Huawei LTE E3272
NVR (cameras) 192.168.1.100

The issue I am having is as follows:
When only the E3272 is plugged into my router the internet works I can access router admin page (192.168.0.254), (factory settings for IP pool i.e. 192.168.0.100-199). This is OK
When only the NVR is plugged into the LAN port of my router I cannot access internet (this obvious as there is no LTE modem). If I want to be able to access my NVR I need to reconfigure the router so that the admin page is on 192.168.1.254 – then the IP pool starts at 192.168.1.100 and I can see the NVR/cameras. This is again OK.

Now at this stage when I plug in the LTE modem the internet starts working but I am no longer able to access neither the M3020 admin page not the NVR. I suspect that the problem is than the LTE modem gets an IP address 192.168.1.100 (see screenshot to better understand what I mean please) which results in a conflict


Anyone has any idea how I could solve this so I could access the internet, nvr(locally) as well as the admin page of M3020? My idea was to change the IP that the LTE router gets but I have not been able to find out how .
Thank you for your time and help in advance!
Richard


  0      
  0      
#1
Options
2 Reply
Re:MR3020 + E3272 + NVR issue
2015-04-14 14:26:01
You cannot change IP address of your NVR/Cameras to 192.168.0.* range?
IP address obtained in 3G/4G section depends on your ISP. Maybe they can update on their side.
  0  
  0  
#2
Options
Re:MR3020 + E3272 + NVR issue
2015-04-15 03:10:36
I would prefer to leave the cameras as they are unless this turns out to be the only option. There should be another way.
As for the IP - I believe the ISP assigns an external IP but as far as I am aware 192.168.1.100 is a private network address and as such I would think it is assigned locally by the router.
Also I forgot to mention earlier that the same happens even when I only change the admin page to 192.168.1.254 (= IP pool starts at 192.168.1.100) and connect the LTE modem. So the NVR is not the main cause of the conflict (although yes it would help if I changed the IP range to the one you suggested)
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 633

Replies: 2

Related Articles