Archer C7 v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Archer C7 v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C7 v2
Archer C7 v2
2015-06-05 22:05:17
Region : Hongkong

Model : Archer C7

Hardware Version : Not Clear

Firmware Version : 3.14.3 Build 150427 Rel.36706n

ISP : Hong Kong Broadband


1000mbps ISP service (WAN) connected and Hardware NAT enabled, but speed test of NAT up and down link falls to around 300 mbps. However, once the router rebooted or unplug and plug the WAN cable, the speed return to around 700-800mbps and lasts for a few minutes. After a few minutes, the speed (up and down link) falls back to around 300mbps. I cannot identify this issue. Please help.

Speed test web sites:

http://www.myspeedmeter.net/
http://www.speedtest.net/

Thanks!
  0      
  0      
#1
Options
12 Reply
Re:Archer C7 v2
2015-06-09 14:21:55
Connecting directly to your modem, you can get about 1000mbps and it is stable?
Did you check the download speed when downloading a file from the internet?
  0  
  0  
#2
Options
Re:Archer C7 v2
2015-06-11 23:29:18
when directly connected to the PC without NAT through C7, it reached the speed of around 700mbps with constant performance.
I just unable to figure out what's the difference between directly connect to PC and connect to C7 via NAT.
I even downgrade the firmware and it did not help at all.
  0  
  0  
#3
Options
Re:Archer C7 v2
2015-06-11 23:59:51
Hi,

What is your WAN setting?
  0  
  0  
#4
Options
Re:Archer C7 v2
2015-06-12 14:25:18
Dynamic IP, DNS server is assigned automatically.
  0  
  0  
#5
Options
Re:Archer C7 v2
2015-06-12 15:39:30
Could you test with Static IP?
  0  
  0  
#6
Options
Re:Archer C7 v2
2015-06-16 16:19:01

williamcwng wrote

when directly connected to the PC without NAT through C7, it reached the speed of around 700mbps with constant performance.
I just unable to figure out what's the difference between directly connect to PC and connect to C7 via NAT.
I even downgrade the firmware and it did not help at all.


Vivian asked whether you get similar results when your PC is connecting directly to whatever your WAN is, without C7 in the middle.
  0  
  0  
#7
Options
Re:Archer C7 v2
2015-06-17 14:09:15
The result is that if the Internet connection is directly connected to client PC, the speed is around 700-800 mbps without such speed drop. I just wonder it is the hardware NAT issue.
  0  
  0  
#8
Options
Re:Archer C7 v2
2015-06-17 16:16:29
You disabled hardware nat on web interface of C7?
  0  
  0  
#9
Options
Re:Archer C7 v2
2015-06-18 22:06:15
if the hardware NAT is disabled, the speed is around 300mbps.
  0  
  0  
#10
Options
same here
2015-06-20 05:58:02
I have the same problem. (archer c7 v2, newest firmware here, ipv4 & ipv6 dual stack from the provider)

ISP speed is 400 mbit/s. After restarting the router i get the full speed over nat ~ 400 mbit/s down.
After some time speed drops to ~ 280-300 mbit/s. With hardware nat deactivated the speed is also ~ 280-300 mbit/s.
Could be a hardware nat issue (hardware nat drops -> software nat) ?
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 2094

Replies: 12

Related Articles