slow internet BE85

Hoping someone can help me.
Im getting around 90mpbs using ethernet on my pc into a satelite.
If i use wifi card and not ethernet i get the same internets speeds
But when i connect to my internet provider modem/wifi instead of tp-link i get speeds around 400 mpbs.
Im on a 500 mpbs plan.
What is making my tp-link transfer internet speeds so slow? is there a setting or something i need to switch on to increase the internet speed?
Cheers for any help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
thanks again for taking the time to offer your help.
I actually think I may have inadvertently stumped across my problem - when I was looking for the QOS setting, I found my operation mode was in wifi mode but access point looks more relevant. I switched to access point and now I'm getting the faster speeds with my tests
I tried the speed test on the app and it's going well
hopefully this change will do the trick.
thank you again
ky
- Copy Link
- Report Inappropriate Content
Hi, may I know how the satellite Deco BE85s are connected to the main unit?
Or can I have some screenshots of the Deco network map, such as:
How about the network speed from the main Deco BE85? Can you get near 500mbps?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi David,
Thanks for your reply.
I just tried plugging my pc direct in to the main deco which is connected direct to the modem, but the speed was exactly the same as when i connect to my computer room satelite via ethernet (or via wifi to the tp-link is still the same)
I took the ethernet out and connected via wifi to my internet provided modem/router and got over 700 mpbs wirelessley..
Cheers
Ky
- Copy Link
- Report Inappropriate Content

Hi, thank you very much for the feedback.
it seems like the internet speed was already limited between the main Deco and the iPrimus gateway.
Please check that the QOS has been disabled or set to 1000mbps download/upload.
Can I have the model number of the iPrimus gateway modem router?
Please also replace a new cable to connect the main Deco BE85 to the iPrimus modem router.
If possible, please also connect the Aussie router to the 2.5G Ethernet port of the main Deco BE85.
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
thanks again for taking the time to offer your help.
I actually think I may have inadvertently stumped across my problem - when I was looking for the QOS setting, I found my operation mode was in wifi mode but access point looks more relevant. I switched to access point and now I'm getting the faster speeds with my tests
I tried the speed test on the app and it's going well
hopefully this change will do the trick.
thank you again
ky
- Copy Link
- Report Inappropriate Content

Information
Helpful: 1
Views: 57
Replies: 4
Voters 1
