Home Network Community > Deco > Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
< Deco

Official Release Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience

123...

Official Release Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience

Official ReleaseDeco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-25 09:02:46 - last edited a week ago
Tags: #Firmware Update #Wi-Fi 7 #Official #Highlighted Thread
Model: Deco BE85  
Hardware Version:
Firmware Version:

This Article applies to 

Deco BE85_V1/V2

 

 

Modifications and Bug Fixes

  • Added the HomeShield APP block features.
  • Disabled WiFi Backhaul if Ethernet Backhaul has been successfully established.
  • Enhanced IPV6 network connection.
  • Improved Network Stability with QoS enabled.
  • Optimized 6GHz connection specifically for Samsung Devices.
  • Enhanced data accuracy for parental control online time and network browsing history.
  • Improved overall Network Roaming experience.
  • Fixed slow speed test results on devices when connected to a Deco in low-traffic state.
  • Fixed the WAN Speed error in the Deco APP. 

 

 

Download Link:

Deco BE85_V1/V2 1.2.0_build_20250724_Official

Update Advice:

 

 

Related Article:

Deco BE65_V1_1.1.1 Firmware Update: Further Enhance Overall Network Stability

Enhancing Satellite Deco Network Stability with Deco BE11000/BE63_V2.6_1.1.7

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.
  0      
 
  0      
 
#1
Options
61 Reply
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-25 09:48:45

  @David-TP thanks for this.

 

I have reverted to 1.1.2 from 1.1.3, as 1.1.3 was too buggy for me especially with my setup of a mixed wired and wireless backhauls.

 

Should I upgrade to 1.1.3 first then 1.2.0, or can I upgrade straight to 1.2.0?

  0  
  0  
#2
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-25 12:38:34

  @David-TP 

 

I've just upgraded.

6Ghz is definitely better with my Sansung Galaxy Book 4 Edge.

 

  1  
  1  
#3
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-25 14:13:33 - last edited 2025-07-25 14:14:48

@David-TP Is this the final build or a preview?

 

In the other thread just yesterday, you mentioned the final release was a few weeks out?

 

Edit: Nevermind, I see this is a pre-release.

 

What has and has not yet been vetted?

  1  
  1  
#4
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-26 01:31:58

  @David-TP 

 

What about deco be 95?

  2  
  2  
#5
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-28 02:12:19

  @THEAZR 

Hi, thanks for your time and patience.

The 1.1.2 could be updated to 1.2.0 directly.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-28 08:53:09

  @Luis-Camacho 

Hi, nice to see you again.

Deco BE95 is also planned to release a similar firmware.

Currently, there hasn't been a specific release date. If there is, I'll keep the community updated as soon as possible.

Thank you very much.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.
  0  
  0  
#7
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-29 09:53:28

  @David-TP 

is proffered deco node for IOT network already with this 1.2.0 ?

  0  
  0  
#8
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-30 03:00:28

  @tatsa 

Hi, nice to see you again.

The "Connection Preference" feature should always be available under "IoT network".  

While there was occasional feedback that smart home devices didn't always connect to the preferred Deco before. The 1.2.0 version has further optimized its roaming strategy.

I think it will improve the IoT network performance.

Best regards

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.
  0  
  0  
#9
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-30 04:10:47 - last edited 2025-07-30 04:11:43

  @David-TP  hi David 

after half day with new firmware , i can feel network performance is better , 

- i enable iot network back 
- iot devices now connect to preferred deco
- iot network access internet as fast as main network before witn 1.1.3 it's super slow almost cant not access to internet when use iot network
- i have about 70 devices on the network on 1.1.3 number of connected device swing around 62-68 very low chance to get all 70 connected , but with new 1.2 70 deviced connected quite there sometimes 68 but not often.
- no wifi backhaul shown on deco map anymore at deco which has ethernet backhaul
- be85 wifi backhaul use both 5ghz and 6ghz on hight capacity mode

But in some spot with my mobile phone, when i move around in my house, phone roam to stronger wifi deco as it should but suddenly internet cant access, need to go to phone wifi setting and on/off wifi and then seem phone connect to weaker deco and then internet is back.  this is sofar only one issue im seeing , 1.1.3 had the same this issue

i also do want to know if i should enable beam forming or not ? 

  1  
  1  
#10
Options
Re:Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience
2025-07-30 09:02:53

  @tatsa 

Hi, thank you very much for the feedback.

Can I have the model number of your mobile phone?

(I saw Xiaomi 15 Pro was mentioned in the previous discussion. Was it the mobile phone here?)

Can the following issue be easily reproduced?

"when i move around in my house, phone roam to stronger wifi deco as it should but suddenly internet cant access, need to go to phone wifi setting and on/off wifi and then seem phone connect to weaker deco and then internet is back"

 

Wait for your reply.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.
  0  
  0  
#11
Options
123...

Information

Helpful: 0

Views: 6334

Replies: 61

Tags

Firmware Update Wi-Fi 7 Official Highlighted Thread
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.