Archer C2 limits ethernet speed to 100 Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C2 limits ethernet speed to 100 Mbps
Model : Archer C2
Hardware Version : Not Clear
Firmware Version : Archer_C2(UN)_v1_151022
ISP :
Hello,
I currently have the problem with my speed with Archer C2.
When I connect a computer (100Mbps) my speed is limited to 100Mbps to the whole network ethernet so I can reach a throughput of 840Mpbs with a computer (1000Mbps).
Example :
PC1 : Computer with 1000Mbps
PC2 : Computer with 100Mpbs
I connect the PC1 on the router and I did a speedtest, results 840Mbps. Now I connect the PC2 on the router. I do a second speedtest on the PC1 and I get a debit 90Mbps.
When I disconnected the PC2, speedtest returns at 840Mbps on PC1.
Why PC2 clamp the speed of PC1 which is 1000Mpbs?
Hardware Version : Not Clear
Firmware Version : Archer_C2(UN)_v1_151022
ISP :
Hello,
I currently have the problem with my speed with Archer C2.
When I connect a computer (100Mbps) my speed is limited to 100Mbps to the whole network ethernet so I can reach a throughput of 840Mpbs with a computer (1000Mbps).
Example :
PC1 : Computer with 1000Mbps
PC2 : Computer with 100Mpbs
I connect the PC1 on the router and I did a speedtest, results 840Mbps. Now I connect the PC2 on the router. I do a second speedtest on the PC1 and I get a debit 90Mbps.
When I disconnected the PC2, speedtest returns at 840Mbps on PC1.
Why PC2 clamp the speed of PC1 which is 1000Mpbs?