tp-wps510u dont work on windows 10
Hardware Version :
Firmware Version :
ISP :
tp-wps510u dont work cannot instal on windows 10 pls help:mad:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Or do this on windows 10 http://www.tp-link.com/en/faq-706.html
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
brackmann wrote
I would recommend this article too: http://www.tp-link.com.br/faq-929.html
Yes, this article works for Windows 10 , but only after the TP-WPS510U is connected to your network, previously setup by another device.
- Copy Link
- Report Inappropriate Content
Ok - this is really frustrating now.
I purchased the WPS510U on the basis of it being able to simply wireless share a printer amongst the 3 computers regularly in use at my home office. All are Windows 10. And I don't own an iPad.
So the Easy Setup just fails 1/2 way through. It disconnects my laptop from the WiFi netwrok, then fails with an error "WlanConnect failed".
So, is there a solution for this now (I see the other posts are years old)?
I really don't want to spend a day reconfiguring just to get a printer to work - if that's what it takes, I'll just plug it into the USB and use sneaker net to print.
- Copy Link
- Report Inappropriate Content
Mike11121 wrote
Ok - this is really frustrating now.
I purchased the WPS510U on the basis of it being able to simply wireless share a printer amongst the 3 computers regularly in use at my home office. All are Windows 10. And I don't own an iPad.
So the Easy Setup just fails 1/2 way through. It disconnects my laptop from the WiFi netwrok, then fails with an error "WlanConnect failed".
So, is there a solution for this now (I see the other posts are years old)?
I really don't want to spend a day reconfiguring just to get a printer to work - if that's what it takes, I'll just plug it into the USB and use sneaker net to print.
Hi,
Please refer to the below instruction to configure the WPS510U.
https://www.tp-link.com/en/support/faq/1056/
Good day.
- Copy Link
- Report Inappropriate Content
Thanks Kevin,
I don't own an iPad, so I tried this using my Android phone. Sadly, failed at Step 1. I see the WLAN-PS network on my phone, but all attempts to connect to it are unsuccessful. It never even asks for credentials - just refuses to connect.
Maybe the problem is that my network uses 192.168.0.x/255.255.255.0, and 192.168.0.10 is already allocated. If I could only get to the PS admin, I could change it to a static address, but so far I have never even seen the Admin or Login screen for the PS.
I appreciate your suggestions though.
Cheers
Mike
- Copy Link
- Report Inappropriate Content
Hi Mike,
The printer server's wifi is open, no password needed. It is suggested to reboot your Android phone and disable/enable wifi function to give it a go.
Once you connected to it, you can setup a static IP for the phone per instruction said.
Besides, you can use other wireless devices to set it up as well.
May it help. Good day.
- Copy Link
- Report Inappropriate Content
Thanks Kevin,
I have done as you suggested - rebooted phone and disconnected from our home WiFi network. Tried connecting to WLAN-PS. Please see attached screen recorder video.
Thanks
Mike
- Copy Link
- Report Inappropriate Content
Hi Mike,
Have you setup static IP for your smart phone after it is connected to the print server's wifi? It should be 192.168.0.x, in the same subnet as the print server.
After that, please test whether you can access the web UI of it.
Besides, you can change different different web browser or open a new incognito window or private windows to give it a go.
Any updates, just let me know.
Good day.
Mike11121 wrote
Thanks Kevin,
I have done as you suggested - rebooted phone and disconnected from our home WiFi network. Tried connecting to WLAN-PS. Please see attached screen recorder video.
Thanks
Mike
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2506
Replies: 9
Voters 0
No one has voted for it yet.