@l0bit0 Port forwarding is pain in the neck on a good day, but in your case it is unlikely to work. Port forwarding maps port to a single internal address. If your HomeServer needs to talk on the...

@SOSOTE You can have that network diagram when running Deco mesh in Access Point mode. For TP-Link Deco specifically, "Access Point" means Deco will provide WiFi mesh with intelligent node...

@netwerkman All Deco models are designed to be compatible, yet some pair better than others. Mixing Deco models from the X-series is generally fine. For instance, the X68 works well with the X50-POE....

@AlexS_in_SA By default, Satellite Deco prefers connection to Main Deco. TP-Link gets a lot of questions on that design decision, so they did create FAQ article: Why does the satellite Deco still...

@Aidy2020 I can't explain why are you getting worse speeds, especially why in Access Point mode. I have Deco mesh with M9 Plus, I went through ISP router replacement with no issues. Just connecting...

@l0bit0 You will need to relax your requirements: 1. Run Deco mesh in Access Point mode; or 2. Run Deco mesh in Router mode and treat Main Deco as your router (as you should), connect Home Assistant...