@Kroppi This usually happens when user configured external storage with static IP address. Configure WD MyCloud to obtain IP address dynamically and it should connect and will be recognized. Then,...

@DefC0n1 Yes - you can. Here is configuration page from Deco app where you can configure which WiFi bands Deco will broadcast at: In this screeshot, user decided to disable 2.4GHz and leave 5GHz...

@tanveer2137 Yes, these test results point strongly to Ethernet cable at the 3rd location. Main Deco can establish Ethernet link, but unable to negotiate speeds faster than 100Mbps. If you have...

@AdvLuke Not sure why that would be: for ISP router Main Deco should appear as just another client, such as PC. No special changes should be necessary if Main Deco configured with getting dynamic IP...

@AdvLuke TP-Link uses the following terminology for Deco Operation Mode: 1. Router - default mode, Main Deco can be connected to either ISP modem or gateway/router; 2. Access Point - Main Deco must...

@AdvLuke To run Deco mesh in Access Point mode, you must be running Sky Router in its default gateway/router mode. Which means, all Ethernet ports of Sky Router should be active. We can use that. The...