@StegoNx It would be easier if you had M4 (V4), its firmware allows manual configuration of Satellite Deco connection preference. With what you have, it is automatic algorithm only. This is how it...

@Stalha One more thing: do you know you can connect Deco units through powerline adapters you have? This may bring WiFi to farther distances and could be handy if WiFi signal from Deco can't...

@Stalha It is recommended to place WiFi nodes not more than 10 meters apart, and having walls between them will reduce maximum allowed distance. The maximum distance from device connected to WiFi...

@StegoNx If you haven't made mistake in specifying Deco model name (M4) and hardware version (V4), then I have good news for you. Specifically for Deco M4 hardware V4 you can configure how Satellite...

@Chilv To have one WiFi network, you should turn off WiFi network from BT Smart Hub 2. Your Deco mesh will be providing WiFi signal. Despite "Access Point" name, Deco mesh will not be extending BT...

@Stalha You are correct that M9 is more expensive, but I am going to disagree with "sensitive power input." I have two M9 Plus for more than 2 years, unless you start tripping over cables (which is...