@abhishekgujjar Please check the hardware version of your M4 units. If it is hardware V4, TP-Link provided solution for it: https://community.tp-link.com/en/home/forum/topic/581554

@ayoung1969 For this kind of Internet speed you don't need WiFi6. On WiFi5 you can comfortably get speeds up to 300-500Mbps, depending on brand and hardware. I don't know why do you need to bounce...

@Dave54 After you removed the ASUS router, can you still print from wired PC to wired Printer? Because, if you can, there is a solution. Follow this document to configure Deco mesh to run in Access...

@ayoung1969 You need both client and WiFi mesh that support WiFi6 or WiFi6E to see benefits. Having said that, there is a caveat: if your WiFi mesh hardware is quite old or underpowered, replacing it...

@Helga You should see "MESH" button for all devices wirelessly connected to Deco, and it will not be shown for devices that are wired by Ethernet cable. We may need to use that button later, but for...

@Bahamas What you are saying makes sense. It would be very unlikely to have hardware failure on all three Deco from the set. There are just two things as a result of your findings. I've been on this...