@eradovan21 With M5/M4/E4, you should realistically expect up to 500Mbps on Main Deco and about half of that, meaning 250Mbps, on Satellite Deco. In theory, you could get up to 867Mbps on WiFi5 on...

@Jackles The isolation is by default in Router mode, I believe, and can not be disabled. When running in Access Point mode, that option appears in WiFi configuration and see how it is described, at...

@Huge85 If you run your Deco mesh in Access Point mode, it does not matter. If you run your Deco mesh in its default Router mode, it does matter if you want your wired Satellite Deco use Ethernet...

@Bilski I have two Win10 desktops and both work with Deco mesh just fine. The older one can only run on WiFi 2.4GHz, I had to enable Guest Network with 2.4GHz only to let PC connect. This is my Deco...

@SimonGA If possible, and it is stongly recommended, connect both powerline adapters to electric wire on the same circuit breaker. After you confirmed you have Internet over powerline link, connect...

@Bilski Can you be more specific with "Mesh not recognized?" Which one of the following it is: My Win10 PC does not see any wireless networks My Win10 PC does see wireless networks, but not Deco mesh...