@FN521 You can open Main Deco IP address in a browser and it should work. For example, if Main Deco IP address is 192.168.68.1, open http://192.168.68.1 in browser. If you don't know Main Deco IP...

@Adotel You can use Deco Guest network to have different SSID with just WiFi 2.4GHz, for devices that can't handle dual band networks well. This is what I've done with my M9s. I also disabled 2.4GHz...

@saruman This layout, all Deco units connected to same switch, will work when Deco mesh runs in Access Point mode. You will have Ethernet backhaul and all mesh features. See General questions about...

@Hans123456789 Yes, you can wire them. See General questions about Ethernet Backhaul feature on your Deco No POE support.

@BanRay I've lost few options once in my Deco app, namely ability to delete Deco node from the mesh. For me the fix was to reboot my smartphone, everything came back after that in Deco app. If this...

@Adie91 Yes, this will work - and, also, with that topology it does not matter if Decos run in Router or Access Point mode. As long as Deco 1 is set as Main Deco.