CJTheBrave wrote (I also found out a few weeks ago that setting static IP setting for the M4's is only available when they are in Router Mode - spent ages trying to find the setting so I could put my...

@Vagueante You can force 5GHz. Configure WiFi settings in Deco app to disable 2.4 GHz on Main Network. Leave 2.4 GHz on Guest Network if you have devices that need it, and make those devices connect...

@Bonhard Glad to hear the issue was fixed. >how you would suggest checking if the Deco is emitting a WiFi signal. For that, I would have told you to install WiFi analyzer app on smartphone. I use...

@Auu You can check that by each of devices, from OVERVIEW page. Yes, it is inconvenient, I agree. You can make it easier for you, if you configure your known devices to only connect to Main Network...

Akhenaten wrote I just find strange that I get 450/500mb on main Deco and other one upstairs on corridor with almost open way I get only 130 @Akhenaten Have you checked what Signal Source for that...

@Dashlate Have you tried playing with QoS settings? See Using QoS feature of Deco. Also, as a quick test, you could temporarily switch Deco mesh to Access Point mode and see if it makes the...