TP1964LV1Online
Following: 0Followers: 0
Forums/ Deco
2021-04-16 15:15:33
Re:Deco x60 latest firmware reset LAN
TP1964 wrote Updated to the latest firmware this morning - after reboot the ip range of the Deco was reset from 10.0.0.0/24 to 192.168.0.0/24 - Several of my hardware devices are hard coded with the...
0HELPFULS
Forums/ Deco
2021-03-12 02:03:07
Re:Deco x60 latest firmware reset LAN
@TP-Link I believe the WAN and LAN DNS IP addresses were in conflict. I was initially using an external DNS server. My theory at this point is that the Deco lost contact with my external DNS server -...
0HELPFULS
Forums/ Deco
2021-03-11 15:24:59
Deco x60 latest firmware reset LAN
Updated to the latest firmware this morning - after reboot the ip range of the Deco was reset from 10.0.0.0/24 to 192.168.0.0/24 - Several of my hardware devices are hard coded with the IP set. I...
0HELPFULS
Forums/ Deco
2021-01-07 19:22:01
Re:Wireless printing with new Deco network
@JoeHarley13 Hey Joe - I have mine set to a static address. They don't make it easy, but you can assign it in the app by hard coding it on the printer (make sure Deco hasn't assigned it to anything...
0HELPFULS
Forums/ Deco
2021-01-07 16:32:31
Re:Wireless printing with new Deco network
@JoeHarley13 Joe -- I was able to get my iphones/ipads working via the iOS printing, I'm not sure if you're experiencing the same issue, but I'll share my solution here in case it helps you and/or...
0HELPFULS
Forums/ Deco
2021-01-06 19:14:37
Re:Wireless printing with new Deco network
@JoeHarley13 That's interesting - I will give that a try - but have always been told (at least for HP) that hooking them up wired disables the wireless functionality. thanks - I'll report back. But...
0HELPFULS
12