Guys, I have a “NAS” running Debian10 that provides the Samba service. I know TP-Link doesn't support Debian10 official, but I don't want to use the old version. I tried to install the Omada SDN...

I connected to the OpenVPN server with my laptop. Execute "route print" command and you will find the route tables. I found that two routes were added, one is 0.0.0.0 mask 0.0.0.0 go via OpenVPN...

@twilly Option61 is the client identifier, R605 support to send option 61, with its mac address. That is, if you change the WAN mac address, the content in option61 will also be changed.

@urbnsr normally with pppoe your IP will change after a period of time, you can not assign an unstable IP to an internal device. Unless you will have stable IP with pppoe?

@Gum12 I'm afraid you got the hardware version wrong. 5120 V2 has a NAT throughput as 350Mbps. https://static.tp-link.com/resources/document/TL-ER5120_V2_Datasheet.pdf

@shberge Default LAN IP of R605 is 192.168.0.1, you cannot change it until the router is adopted. The discovery process is done with Layer-2 communication, but the adoption process must be done with...