@David_R For reference I found the problem, you have to manually set the authentication type to CHAP and disable VLAN mode. Completely different from the official instructions on PlusNet's website.

I have just upgraded to full fibre and set the parameters for the WAN interface as recommended but the router won't connect failing as follows: 2016-01-01 00:16:02 [5] System: EWAN link up 1000 mbps...

Unfortunately for me, the 201103 version caused my router to crash after 2-3 days, so I have had to revert to 200227. Support are suggesting this is a hardware fault so I would be interested if...

@Kevin_Z It's a 2TB Seagate drive using NTFS. SMB and HTTP works fine, and the problem is not confined to any particular format of audio file, it also seems to fail to index all the photos as well....

I have found a large number of my audio files are not visible in the media server, though they are there if I look at it as a file share. If I stop and start the media server, sometimes different...

I would suggest you log a case with TP Link support. I did that and they came back to me really quickly with a firmware update. I tried that but it didn't work with my ISP (plusnet) for some reason,...