I am using an OC200 on a network in a campground with about 250 camp sites. Each site is set up with its own local user account with a login and password, and each account allows up to 6 devices...

@UKJim They have three 10/100 ports on them with no port control interface. I use these to extend wifi in public areas where there is already bandwidth limits and I don't need the speed of the more...

@UKJim I have the same situation with one of my installations using two sets of EAP115's with a 650 attached. In both cases, the bridges show that they are wired and the 650's are meshing back to the...

@ghost124 Have you tried to adopt it connected to a different source? Is it getting power? Did you try different ports on the router?

@Orikfricai Now that you mention fiber, I believe I have had a similar situation. I had a EAP610 outdoor at the end of a Pharos bridge that wouldn't adopt properly. I eventually got it to adopt but...

@Orikfricai If you have a USB C to ethernet adapter, try plugging that directly into your ISP modem and see if you have the same results. These adapters are cheap and very handy for this type of...