@Vincent-TP Unable to download the pre release version of Pharos Control, the link just says to go to the software downloads, where the pre release doesn't exist.

@GeneralFandango The 710 connected to your router should be set up as an access point with the second set up as a client. Make sure you change the ip addresses on them (I like to put my first ap as...

@GeraldWiley You can see it with your device, but it won't connect to the internet? Is your device not able to get an IP address through the AP? If that's the case, you may want to make sure there...

@DHC_IT I'll post an Amazon link to a device that works great, it takes the 48v poe out of the switch and converts it to passive 24v. I am replacing all my 24v passive injectors that are connected to...

I am using an OC200 on a network in a campground with about 250 camp sites. Each site is set up with its own local user account with a login and password, and each account allows up to 6 devices...

@UKJim They have three 10/100 ports on them with no port control interface. I use these to extend wifi in public areas where there is already bandwidth limits and I don't need the speed of the more...