FerimanLV2Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2025-09-17 10:27:13
Re:[BUG] The AX53 Wi-Fi stays off even after Wi-Fi has been re-enabled on the controller
@Joseph-TP Yes, I was able to reproduce the issue today again. Will you fix this issue in router's firmware? If yes, is there an ETA? I can test it in my environment. Thanks!
0HELPFULS
Forums/ Wi-Fi Routers
2025-09-16 13:39:05
Re:[BUG] The AX53 Wi-Fi stays off even after Wi-Fi has been re-enabled on the controller
Hi @Joseph-TP Yes, after resetting the AX23, everything is fine again. My theory is that when the C6 and AX23 start up at the same time (e.g., after a power outage), the AX23 somehow receives a...
0HELPFULS
Forums/ Wi-Fi Routers
2025-09-14 13:28:19
Re:[BUG] The AX53 Wi-Fi stays off even after Wi-Fi has been re-enabled on the controller
@Joseph-TP After updating the AX23, everything went fine. After updating the C6 v4 from 1.14 to 1.15, the internet speed on AX23 dropped to 1-2Mbit/s (it was 600-700Mbit/s before the update). Same...
0HELPFULS
Forums/ Wi-Fi Routers
2025-08-25 16:03:18
Re:EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Could you please clarify where did you test the speed? On the mesh nodes (AX23 v1.2 and AX53 v2) or on the client devices that connect to the mesh nodes? How are the AX23 and AX53 connected to the...
0HELPFULS
Forums/ Wi-Fi Routers
2025-08-25 15:44:08
Re:EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Hi @Kevin_Z, There's no Advanced menu (as you can see on my screenshot above), or not even under the "System":
0HELPFULS
Forums/ Wi-Fi Routers
2025-08-23 20:37:00
Re:Pre-release Firmware for Archer C80/A8/C6/C86/C88 Brings a Host of New Features and Optimizations
@Kevin_Z Maybe it's a better thread to report a missing feature. :) I found a missing feature in the C6 v4 beta firmware. While the channel is configurable on other routers, such as the AX55, it is...
0HELPFULS