@jcouzy Found the same issue. Setting the limiting source IP other than 'Any' 0.0.0.0/0 would disable that rule. Fortunately, upgrading to the recent 1.1.0 TL-R605 firmware have it fixed.

@NBAus Well, I tried the new 1.1.0 TL-R605 firmware and it seems this issue has been fixed.

The EAP265HD is in standalone mode without a controller. I can access its web portal locally. I set port forward in the router but EAP265HD does not respond when I access from outside. I tried...

The ER605 has LAN IP address of 192.168.0.1 and my test is turn on ER605's SSH server and port forward to 192.168.0.1:22. It works if source IP is set to 'Any' (0.0.0.0/0). If I set it to limit IP...

@Arcamm It works for me only if the Source IP is set to Any. My test is turn on SSH and port forward to 192.168.0.1:22. If I set it to limit IP addresses to x.x.x.x/32, it then stops working...

I enabled SNMP. For testing, I set trusted host to be 0.0.0.0. When I use snmpwalk, I can get response when I access the LAN port, but not through the WAN port. I tried opening port 161 in the...