Forums/
Controllers
2023-07-05 16:16:57
@d0ugmac1 So, I will configure in this way: VLAN L3 on Router/Firewall Omada Switch in Standalone mode VLAN ID port association (tag/untag/pvid) eventually ACL to block switch communication OC200 in...
0HELPFULS
Forums/
Controllers
2023-07-05 13:47:03
@d0ugmac1 so I set the EAP as Controlled Mode, right?
0HELPFULS
Forums/
Controllers
2023-07-05 04:53:26
@d0ugmac1 so, with the Switch in Standalone mode, how can I set the EAP? Controlled or Standalone mode? You consider I bought OC200. Thank you!
0HELPFULS
Forums/
Controllers
2023-07-04 21:40:15
@d0ugmac1 I remembered I have see this note on this link https://www.tp-link.com/it/support/faq/2097/: "If Omada Controller or OC200 accidentally shuts down, then fast roaming will not work." What do...
0HELPFULS
Forums/
Controllers
2023-07-04 15:43:50
@d0ugmac1 The Roaming function is fully supported also in STandalone mode?
0HELPFULS
Forums/
Controllers
2023-07-04 15:21:56
The Omada switch must have "Controlled mode" active to allow OC200 of manage the network or it can be work with STandalone mode? I would like that OC200 manage only the EAP and they roaming.
0HELPFULS