vk3hjqLV2Online
Following: 0Followers: 2
Forums/ 3G/4G Routers/MiFi
2023-01-27 01:38:05
Re: MR600 v1/v2/v3 4G/+ External Antenna Information (LPDA MIMO) Australia - John VK3HJQ
@Gef
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-12-06 07:58:51
Re:Antenna and wifi
@steve666dfadgad Hi there, The MR600 V2 has are 2 detachable 4G LTE antennas & 2 Internal WiFi antennas (similar to this picture below). Yes it will still work on WiFi inside if you replace the 2...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-11-07 13:52:52
Re:Help with Archer-MR200 V2 4G signal reception
@CarlosOliveira Yes orientate it @ 45 Deg. FYI: Cable loss for LMR400 coax @ 2100MHz is 0.20dB/m & RG58 coax used here on this panel antenna @ 2100MHz is 0.76db/m, so 5mtrs is now @ 3.8dB, that's...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-11-06 23:28:24
Re:Help with Archer-MR200 V2 4G signal reception
@CarlosOliveira How did you work out the gain figure of 7.5dBi, as 5mts of RG58 coax used on these panel type antennas @ say 900Mhz is about 2.7dB of loss, (3dB is 1/2 your signal gone) Now you can...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-11-06 21:58:58
Re:Help with Archer-MR200 V2 4G signal reception
@CarlosOliveira So are these antennas mounted Vert & Horiz & not @ 45 deg as they should be for 2X2 MIMO. The top antenna should be connected to the AUX. John vk3hjq
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-11-05 22:06:27
Re:Help with Archer-MR200 V2 4G signal reception
@CarlosOliveira I hope it works ok, usually these types of Panel Antennas have less gain over a LPDA & a lot more cable loss. John vk3hjq
0HELPFULS
1234...