vk3hjqLV2Online
Following: 0Followers: 1
Forums/ 3G/4G Routers/MiFi
2022-03-01 23:24:55
Re: MR600 V2 & 4G/+ Antenna Information (LPDA MIMO) AU - John VK3HJQ
@MR600EU I have no idea why your WiFi is not working. John vk3hjq
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-01-26 02:33:32
Re:How to identify in TL- MR 100 4g router Antenna are working or not ?
@Scubajoey Scubajoey wrote Very helpful info. I've been struggling to understand why there is 42kohms at the main aerial port and an open circuit at the auxiliary. I swapped small aerials around and...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2022-01-26 02:07:25
Re: MR600 V2 & 4G/+ Antenna Information (LPDA MIMO) AU - John VK3HJQ
@Scubajoey Scubajoey wrote Very impressive writeup, 🥇👍 Any info on the flat panel direction antenna? I just got a Blake UK antenna Hi there, The only reason for this article (after researching the...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-11-23 21:09:58
Re:Trade in - mr600 v1
@Power-Station Check out the spec difference for both AU models here https://www.tp-link.com/au/home-networking/3g-4g-router/archer-mr600/ Some info on Antennas if you are interested too...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-10-22 20:55:36
Re:12v supply
@ArcherC8 It sounds like a 12V supply only & the 240V is via a 12 V - 240V Inverter by the look of it, otherwise yes, just run it off the 240V - 12V power supply supplied with the unit. John vk3hjq
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2021-10-22 09:42:27
Re:12v supply
@Datman. yes a SEPIC - "Single Ended Primary Inductor Converter" that acts both as a Boost & Buck converter that will step Up or Down depending on the input voltage. John vk3hjq
0HELPFULS
123...7