Fleegle61LV2Online
Following: 0Followers: 0
Forums/ Omada Cloud SDN
a week ago
Re:Turn off lights OC200
@JGM_JGM I have not seen anyplace where you can just do the OC200 only. You can go into settings/site and do a global LED change or each device on its own.
0HELPFULS
Forums/ Omada Cloud SDN
2 weeks ago
Re:Remote logging from OC200 to Synology NAS issues
@Virgo Right now I have the NAS set to BSD and it appears to be receiving properly formatted information. I will be changing that to IETF to see if I start to see the errors. Thats the only 2 canned...
0HELPFULS
Forums/ Omada Cloud SDN
2 weeks ago
Re:Omada Hardware Controller v5.5.7 issues
@lflorack double check. I have a 3.20 2210P and it prompted me to go to 3.20.5 I just did it this morning so I will give it 24 hours to see if it works without any problems or requiring a power cycle.
0HELPFULS
Forums/ Omada Cloud SDN
2 weeks ago
Re:Omada Hardware Controller v5.5.7 issues
@lflorack appears there is now a 3.20.5 for the 2210 switch. They pulled back the 3.20.4 Who is up for another upgrade to see if we have to power cycle all the hardware???
0HELPFULS
Forums/ Omada Cloud SDN
2 weeks ago
Re:Remote logging from OC200 to Synology NAS issues
@Virgo Synology has their own suite of tools built into the NAS. The app is called LOG CENTER. It allows for me to receive syslog entries either IETF or BSD. I also have the option to set up a custom...
0HELPFULS
Forums/ Omada Cloud SDN
2 weeks ago
Re:Odd MAC address showing up after OC200 5.5.7 and 2210P 3.20.4 upgrades
@Virgo I was able to find the issue. I went around the house and tried checking the MAC addresses and didnt find it. But I looked at my logs and didnt notice my company ipad listed anywhere. I...
0HELPFULS
123...13