stupidbird wrote If one of the two works, please share the result with us. Yes, both will work. but with #2 you will be doing double NAT on the Network, as posted on #13

Any ip you set between 50&254 it's wrong, cause you are in DHCP pool of ISP router set ips in this range 2 to 49 any Numbers you like beteeen those

rui tavares wrote I followed your advice and set up my daughters device to client with DHCP enabled. Didn´t help. Client mode is with DHCP disable

Location 1, on same subnet as isp router, different ip, out of dhcp pool, start with ch. 153, set AP mode, MAXTream disable Location 2 too on same subnet, different ip and out of dhcp pool, same...

the one close to cable modem internet feed, set Standard AP mode, the rest Clients, or AP-Client-Router mode

From your post #1 This connected to a LAN port of a wireless router, Asus WL-500G Premium V2 with DD-WRT v24-sp2 (08/07/10) mega - build 14896 setup as AP Mixed Channel 1 DHCP enabled. If you connect...