@JeanV The device label can be found on the device itself. Because this is an outdoor device, the label has been placed beneath the cover. To get it, remove the unit's small cover. In addition, the...

@Rmenghe EAP115 and other EAP series products do not provide WPS feature.You can only manually connect air conditioner units to the EAP115.

@cincom Please refer to our setup video for adding APs to the controller: How to Adopt Omada Devices via Omada Controller We also have a troubleshooting guide if you encounter any errors when adding...

@dononeil What kind of speed test sever you are using? I suggest you try to test the speed using iperf.How to use iPerf to test the speed between the EAP and the wireless client You can perform a...

@muzicman0 The controller configuration module shows that the switch has been adopted by the controller, with an IP address of 192.168.0.102. However, according to the network topology displayed...

@Rabb1t I believe the unit's capacity to detect the PoE is sensitive.It is in fact abnormal. If you purchased it recently, you can try contacting the retailer to obtain the most current hardware or...