k1hog wrote Please advise how to connect the eap225 outdoor directly to the oc200 and then to the router. Thanks Hi @k1hog Please try to connect both the EAP225-Outdoor and OC200 to the same router...

balajisivaraman wrote Hi All, I have setup my home office in the following topology. The entire house is wired with a Cat 6 cable. WAN -> ISP-Provided Router -> TL-SG1005P PoE Switch -> 1 EAP-610...

Hi @Peacecamper Can you show me the port setting of the relevant switch you connect the PC? And what is the IP address of it? And please also check the port setting connects to the EAP, and check the...

Peacecamper wrote @Hank21 There are no vlan settings on the router, it's a model from my service provider and rather basic. I can access the configuration page for my antenna (VLAN 7 only) from my...

Hi @Peacecamper Have you checked your VLAN setting on your router/gateway? For VLAN on layer 2 switch, the different VLAN should be not able to communicate with each other. Thus you need to check the...

TOHanks wrote @Hank21 why use the EAP as the NAS, but not the Controller? If there are hundreds of AP or even more, it's not reasonable to configure Radius Policy using EAP's IP. Hi @TOHanks Do you...