@JK-Alpheron you can find the radiation pattern from the datasheet. https://static.tp-link.com/upload/product-overview/2022/202206/20220617/EAP%20Datasheet.pdf

@ha_tech what you did at first, you were adopting them from local site(lan). omada controller works by lan. this is the default working mode. if you want to manage it remotely, you are gonna do...

@Baseng yep. same thing. http 80 https 443, so two rules should make the same thing. you can also use the ip/subnet. 32 refers to a single ip address which means it's one and only. so, you can use...

@Baseng Baseng wrote @Tedd404 Thanks for your help! But can you post an screenshot of that config? We can't follow your description.

@iampegram wan disconnect would show up in the log. switch over should do that as well. do you find the switchover in the event/alert list?

@Baseng OK. I just did a simple test by creating the ip-port acl. blocking port 80 and 443, because the gateway is still using both for access. default lan 10.0.0.1/24 create a vlan for test...