ady23LV1Online
Following: 0Followers: 0
Forums/ Omada Cloud SDN
2022-03-23 05:49:58
Omada controller 5.0.30, poe schedule ometime skips the time
Hi everybody, I have found that poe schedule sometimes missing the time for turn off a port. Usually it's working fine, but I observed a few times the poe schedule for turn off didn't worked. I have...
0HELPFULS
Forums/ Omada Cloud SDN
2022-03-23 05:24:24
Re:TL-SG2008P switch diconnected in omada dashboard that affects WiFi AP2 schedule
Thanks for all replays, I have solved the issue by setting al VLANs again on the switch, as I did not remember how I set the first time (a few month before that). The main point - management VLAN...
0HELPFULS
Forums/ Omada Cloud SDN
2022-02-16 06:56:38
Re:TL-SG2008P switch diconnected in omada dashboard that affects WiFi AP2 schedule
@dpsguard I think you are right. The problem is how the switch and AP are getting the ip addresses and how they use the MANAGEMENT VLAN. I have set the MANAGEMENT VLAN (vlan 9 in my case) on my...
0HELPFULS
Forums/ Omada Cloud SDN
2022-02-15 07:44:41
Re:TL-SG2008P switch diconnected in omada dashboard that affects WiFi AP2 schedule
@Hank21 The controller version is 5.0.30 and the switch firmware version is 1.0.2. I have forget the switch in omada dashboard and nothing changed, so I have reset the switch too. Here what I have...
0HELPFULS
Forums/ Omada Cloud SDN
2022-02-13 06:29:33
TL-SG2008P switch diconnected in omada dashboard that affects WiFi AP2 schedule
Hello, I need some help to troubleshoot the disconnected TL-SG2008P switch in Omada dashboard. The TL-SG2008P switch is connected to pfsense firewall through a trunk of several tagged vlans (9,...
0HELPFULS
Forums/ Omada Cloud SDN
2022-02-11 08:07:28
Re:incorrect time on oc200
@Virgo Thanks for response. I use pfsense NTP server, and I created a rule for OC200 and I can see some traffic for that rule, so I would assume the controller is accessing pfsense on port 123 for...
0HELPFULS
12