@TandS At the very least you should be able to assign that client an IP from the same pool as the EAP245. It gets trickier if you want it on a different subnet/VLAN. If it's a PC, you could probably...

That doesn't surprise me at all. Omada doesn't do a good job with multifunction devices like routers or AP's with secondary switches in them.

@rausimous Until recently I was running that exact config (ie ER605v1 and SC5.8.4), and it ran fine for many months. I suspect you have a weird configuration error which is isolating the ER605 from...

@TandS The 2nd ethernet port is a dumb switch, so that same client will appear as if physically connected to the same switch port as the 245 is. The -Wall units have the ability to assign VLAN's to...

@AnnusKhan For the swap over, please keep in mind that you can have exactly 1 (active) router per Site in Omada controllers. You should be able to do a relatively clean swap over (though there will...

@CanCBA Viele Dinge können sich auf Ihre VPN-Stabilität auswirken. Typischerweise besteht das Problem in Paketverlusten, kann aber auch auf Änderungen der IP-Adresse zurückzuführen sein. Wir müssen...