@Bug_do_Ti If you bought the ER605V2, then upgrade to the latest firmware and use Wireguard as your VPN. You are still ultimately going to be limited to capability of the embedded processor in the...

@dagoosemusic Two birds, one stone. With SFP+ ports, one product can be used for either ethernet or fibre 10G connections. You also don't need to spend the $40 or so on internal components per port...

@danielgwood Last thought...if you're going with Router+POESwitch+OC200 (US$60+$90+$100=$250)...you might consider the 8411 (US$350) or the 7212PC (US$2XX?). It might be a bit more but they are both...

@WilliamNL And if it helps, please check your subnet settings. I have shown the LAN setup I have, but it's the same thing for the other 4 subnets. You must make sure that your subnets get tagged to...

@WilliamNL So for fun and giggles...I happened to have a spare switch kicking around and I just plugged it in below the main switch I'd shown above, and lo two new Switch routing entries were added:...

@WilliamNL OK, your Gateway setup looks identical to mine (I have 4 extra subnets for different SSIDs configured, much the same as your .50's) and the Gateway table matches. Your switch table on the...