@runner89 Difference is I was using L2TP and you are using OpenVPN. I am pretty sure you need to manually edit the .ovpn file to change the vpn client settings. The reason I suspect a difference is...

@Jaam You can Adopt all APs at a both sides of a site to the same logical Site if you configure those APs from the slave site with the Controller discovery info. Then the APs can all be managed as...

@Jaam Individual SSIDs is messy. Scenario 1 -- I would keep the same SSID at each site which you can do by configuring the APs at each site with the remote IP of the Omada Controller in the DC (and...

@adamzk In standalone mode the hostname seems to be hardcoded by the firmware. I was showing the Omada SDN screens which allow you change the 'nickname' that the system uses for it's display and...

@Jaam I think the only way you can do what you want is to make sure the user network(s) used for wireless are the same for the A and B APs at any given site. This means you need that user traffic to...

@mftitalia Agreed, the whole 'use a management VLAN' part of the Omada solution seems pretty clunky and poorly thought out. I found it easier to turn the whole thing on its head and just VLAN and ACL...